Military Wiki

Coordinates: 51°15′12″N 0°46′48″W / 51.2534°N 0.7799°W / 51.2534; -0.7799

The Wellington Monument, Aldershot, showing the Duke of Wellington, holding a field marshal's baton, seated on his charger Copenhagen

The Wellington Statue in Aldershot is a monument to Arthur Wellesley, 1st Duke of Wellington victor at the Battle of Waterloo and later Prime Minister of the United Kingdom. Sculpted by Matthew Cotes Wyatt, it was the largest equestrian statue in Britain when it was unveiled at its original location on the Wellington Arch at Hyde Park Corner in 1846.[1]

Origins of the statue

'The Grand Procession of the Wellington Statue, Turning Down Park Lane' The Illustrated London News 3 October 1846

In 1837 a Committee was formed under the chairmanship of the Duke of Rutland to raise sufficient funds for a memorial to Arthur Wellesley, the 1st Duke of Wellington. The sculptor was Matthew Cotes Wyatt. In the statue the Duke is shown on Copenhagen, the famous charger that he had ridden at Waterloo. Much of the bronze in the Statue is derived from French cannon captured at Waterloo and remelted in Wyatt's foundry. Wellington himself sat for the sculptor. Copenhagen, however, had died and a substitute horse was used as a model, which offended many at the time who saw a poor likeness to Copenhagen in the statue.[1]

The position selected for the sculpture was on top of the triumphal arch at Hyde Park Corner, built in 1827–8 in conjunction with an Ionic screen as part of a processional route between the park and Buckingham Palace.[2] Wellington had his London residence at Apsley House, immediately next to the screen.[2]

The work was executed at Wyatt's workshop at Dudley House in the Harrow Road starting in May 1840. The modelling work was done by Wyatt's son James Wyatt. The model consisted of more than than three tons of plaster of Paris formed over a timber frame with a beam for the backbone and transverse timbers like the ribs of a ship. The model was on a turntable 20 feet (6.1 m) in diameter and the artists could reach all parts of it by means of an adjustable stage that could be raised and lowered. The modelling work took three years.[3]

For casting, the model was lowered into a pit in a specially built foundry. The statue was cast in bronze melted in two furnaces; one could melt twelve tons at a time, but this was found insufficient, so a second furnace of 20 tons capacity was constructed. Even so, the body of the horse and the lower limbs of the duke were cast in two pieces and the rest of the statue was cast in a further six pieces all between 1 and 3 inches (25 and 76 mm) thick. The legs of the horse were cast solid so as to bear the great weight.[3]

At the time it was the largest equestrian statue in Britain, being 30 feet (9.1 m) high, 26 feet (7.9 m) from Copenhagen's nose to tail, and 22 feet 8 inches (6.91 m) in girth. It weighed 40 tons.[3] In 1846 the statue was moved with great pageantry from Wyatt's workshop to Hyde Park Corner. It was transported on a huge low carriage that had wheels 10 feet (3.0 m) in diameter and had been constructed by H.M. Dockyards at Woolwich. The carriage was hauled by a hundred men of the Scots Fusilier Guards; as it emerged onto the road, it was greeted by enthusiastic cheers from the crowd of sightseers. Twenty nine horses then drew the carriage to Hyde Park Corner.[4] It took some hours to get the statue into position for hoisting and the final lift and fixing into position on the victory arch was completed the following day.[5]

Move to Aldershot

The restored statue

Many thought the statue out of proportion to the arch: its architect, Decimus Burton, especially disliked it, and left money in his will for the statue's removal.[2] Queen Victoria also regarded it as an eyesore, marring the view from Buckingham Palace; however, it could not be tactfully moved during the lifetime of the Duke of Wellington, who would have seen such a move as an insult.

When Wellington Arch, also known as "Constitution Arch" or (originally) the "Green Park Arch", was moved in 1882-3 a short distance to its present location on Hyde Park Corner, the Statue of the Duke was removed and left in Green Park while its future location was debated. In 1883 the Prince of Wales, the future King Edward VII, suggested that it should be moved to Aldershot Military Town, "where it will be highly regarded by the Army." Eventually Parliament agreed with his suggestion and the statue was taken to Aldershot for reassembly. Its removal from the arch had been a relief to the many critics who had considered it out of proportion and inappropropriate for such a location.

On a visit to Aldershot, the Prince of Wales selected Round Hill close by the Royal Garrison Church as the new site for the Statue. Moving Wyatt's creation from London was no mean feat. However, it was successfully and ceremoniously handed to the British Army in August 1885 in front of a large crowd of onlookers.


The statue fell into a poor condition in the last half of the twentieth century, being largely hidden behind overgrown trees and bushes on Round Hill. In early 2004 Aldershot Garrison, supported by local conservation groups and volunteers, commenced a major restoration project to restore it to its original condition. The bushes were cleared and the statue was re-bronzed. The Friends of the Aldershot Military Museum have taken on the role of Friends of the Statue, supported by Aldershot Garrison, Rushmoor Council and the Blackwater Valley Countryside Partnership.

See also



  1. 1.0 1.1 Cole, 1980. p. 89.
  2. 2.0 2.1 2.2 Stamp, Gavin (1984). The expanding Metropolis. Harmondsworth: Viking. pp. 132–3. ISBN 0-670-80058-9. 
  3. 3.0 3.1 3.2 Cole, 1980. p. 90.
  4. Cole, 1980. p. 91.
  5. Cole, 1980. p. 92.

General references

  • Cole, Howard N. (1980). The Story of Aldershot: A History of the Civil and Military Towns. Southern Books. ISBN 978-0-9507147-0-7. 

External links

This page uses Creative Commons Licensed content from Wikipedia (view authors).