Military Wiki
Stalingrad-class battlecruiser
File:Stalingrad2vew.jpg
Side and plan views of the Stalingrad class
Class overview
Operators: Naval Ensign of the Soviet Union Soviet Navy
Preceded by: Kronshtadt class
Built: 1951–53
Planned: at least 4
Cancelled: 4
General characteristics Project 82 design
Type: Battlecruiser
Displacement: 36,500 metric tons (35,900 long tons) (standard)
42,300 metric tons (41,600 long tons) (full load)
Length: 273.6 m (897 ft 8 in)
Beam: 32 m (105 ft 0 in)
Draught: 9.2 m (30 ft 2 in)
Installed power: 280,000 shp (208,796 kW)
Propulsion: 4-shaft TV-4 geared steam turbines
12 water-tube boilers
Speed: 35.5 knots (65.7 km/h; 40.9 mph)
Endurance: 5,000 nmi (9,300 km) at 18 kn (33 km/h; 21 mph)
Complement: 1,712
Sensors and
processing systems:
Giuis-2 air-search radar
Rif-A surface-search radar
Iakor, Zalp, Fut-B fire-control radars
Grot and Shtag-B range-finding radars
Soltnse-1P infrared detectors
Gerkules sonar
Electronic warfare
& decoys:
Korall and Machta jammers
Armament:

3 x 3 - 305 mm (12.0 in) guns
6 x 2 - 130 mm (5.1 in) guns
6 x 4 - 45-millimeter (1.8 in) guns

10 x 4 - 25-millimeter (0.98 in) guns
Armor: Waterline belt: 180 mm (7.1 in)
Upper deck: 50 mm (2.0 in) each
Middle deck: 70 mm (2.8 in)
Turrets: 240 mm (9.4 in)
Barbettes: 235 mm (9.3 in)
Secondary turrets: 25 mm (0.98 in)
Conning tower: 250 mm (9.8 in)
Bulkheads: 140–125 mm (5.5–4.9 in)

The Stalingrad-class battlecruiser, also known in the Soviet Union as Project 82 (Russian: Тяжёлые крейсера проекта 82), was intended to be built for the Soviet Navy after World War II. Three ships were ordered, but none were ever completed.

A heavy cruiser was designed before the Second World War as an intermediate between the light cruiser Kirov and Chapayev classes and the Kronshtadt-class battlecruisers. The specification, or OTZ in Russian, was issued in May 1941, but plans were shelved with the invasion of the Soviet Union by Germany. Construction was proposed again in 1943. After a lengthy design period, which Premier Joseph Stalin—a major supporter of the project—often had a hand in, keels for two ships were laid at the Marti South Shipyard in Nikolayev (1951) and the Baltic Works in Leningrad (1952) and a third ship was planned for the shipyard in Severodvinsk.

The Project 82 design which was ordered would have been much larger than the original intermediate design, so much so that they were considered the successors to the Kronshtadts, which had been canceled at the outbreak of World War II.[1] As envisioned by Stalin, the Stalingrad battlecruisers' role would be to disrupt and break up an enemy's light cruisers when they approached the Soviet coast. However, after his death in March 1953, the ships were canceled by the Ministry of Transport and Heavy Machinery. Only the incomplete hull of Stalingrad was launched; used as a floating target for anti-ship missiles, it was scrapped around 1962.

Background and genesis[]

The roots of the Project 82-class began back in May 1941 when the Main Naval Staff approved tactical requirements (Russian: Operativno Takticheskoye Zadanie) for a medium-sized cruiser between the light cruisers of the Kirov and Chapayev classes and the "heavy cruisers" of the Kronshtadt class in size. It was intended to fulfill the following roles:

  • Engage enemy cruisers armed with 203 mm (8.0 in) guns
  • Destroy enemy light cruisers
  • Support its own light cruisers
  • Lay minefields
  • Suppress the enemy's medium-caliber coast defense batteries and support landing operations
  • Conduct operations against the enemy's maritime lines of communication[2]

To accomplish these missions the Navy expected a ship of 20,000 tonnes (20,000 long tons) or smaller, armed with eight 203-millimeter (8.0 in) and twelve 100-millimeter (3.9 in) guns, twelve 37-millimeter (1.5 in) anti-aircraft guns and one triple 533-millimeter (21.0 in) torpedo mount. It was to be armored to withstand 203 mm shells with a speed not less than 36 knots (41 mph; 67 km/h), a range of 10,000 nmi (18,520 km) at 20 knots (23 mph; 37 km/h) and able to carry four seaplanes launched by two catapults. Three preliminary designs were proposed in response, but only one, which displaced 25,000 tonnes (25,000 long tons), was able to meet all of the requirements. However, the designers recommended an increase in the main armament caliber to 220 millimeters (8.7 in), a strengthened anti-aircraft battery and reductions in the armor protection, speed, and range, but the start of Operation Barbarossa a month later rendered these plans moot.[2]

The project was revived in 1943 with a new requirement issued on 15 September. This was basically identical to the original, but added one new requirement: "Protect the operations of aircraft carriers and conduct joint operations with them."[2] Estimated characteristics were a displacement between 20,000–22,000 tonnes (20,000–22,000 long tons), nine main guns between 210–230 mm (8.3–9.1 in), a secondary battery of a dozen 130-mm dual-purpose guns and thirty-two 37-mm AA guns. The speed, range and aircraft requirements remained the same, although the torpedo tubes were dropped. Over a dozen preliminary designs had been proposed by May 1944, but none were acceptable. A new tactical requirement was issued in November 1944 that envisioned a more realistic displacement of 25,000–26,000 tonnes (25,000–26,000 long tons) while the speed was dropped to 33 knots (38 mph; 61 km/h) and the range to 8,000 nmi (14,820 km). Armament was also revised to nine 220-mm guns, sixteen 130-mm guns, thirty-two 45-millimeter (1.8 in) and twenty 23-millimeter (0.91 in) AA guns.[3] These last guns were changed to 25 mm (0.98 in) in 1945.[4]

Admiral Nikolai Kuznetsov believed that these ships could protect the planned Soviet aircraft carriers in bad weather from American cruisers and pushed to have them built, but the Shipbuilding Commissariat balked. It refused to begin detailed design work pleading the uncertainty of the post-war building situation and the already heavy workload of its design bureaux. Undeterred, the Navy continued studying cruiser designs and planned a ten-year construction programme for the period 1946–1955. This was based on defensive operations along the periphery of the Soviet Union against Anglo-American carrier groups while submarines would attack their lines of communication. Ten of these large cruisers were envisioned as part of this construction program. When the program was discussed by the Politburo on 29 September 1945 there was no great disagreement on the large cruisers, although Stalin favored increasing the size of their main guns to 305 mm (12.0 in), but did not push the issue when Admiral Kuznetsov resisted.[5]

A bigger problem was the resistance of the Shipbuilding Commissariat which said it would be impossible to lay down any ships of new design until about 1950 and that only incremental changes could be made to the designs currently in production. The Navy saw no reason why new ships, reflecting wartime experience, could not be laid down beginning in 1948. To resolve the dispute a special commission was appointed, led by Lavrentiy Beria, which mostly sided with the Shipbuilding Commissariat in that most ships of the program would be improved versions of current designs. Four of the large cruisers were to begin construction, two each at Shipyard 402 in Molotovsk and Shipyard 444 at Nikolayev with another three planned to be laid down in 1953 and 1955. This compromise was approved on 27 November 1945 and detailed design work began in 1946 for designs equipped with both the 220-mm and 305-mm guns.[5]

This was reaffirmed by a decree of the Council of Ministers on 28 January 1947. By August 1947, the Navy and the Shipbuilding Ministry had winnowed down design proposals to only three, one from each armed with 305 mm guns and a joint design armed with 220 mm guns. The latter's design was slightly smaller (2,000 tonnes (2,000 long tons)) than the Navy's 40,000 tonnes (39,000 long tons) design, and had an armor belt 50 mm (2.0 in) thinner, but was otherwise almost identical. The joint design was 2,000 tonnes (2,000 long tons) smaller with a reduced secondary armament, but was about 1.5 knots (1.7 mph; 2.8 km/h) faster. All proposals had a range of 6,000 nmi (11,110 km) at 18 knots (21 mph; 33 km/h). These designs weren't reviewed until March 1948, probably because of the need to coordinate reaction to the American Marshall Plan, and Stalin approved the Navy's more heavily protected design. But even this was subject to more delays as the detailed specifications had to be approved and this didn't occur until 31 August 1948, likely delayed by the Tito–Stalin split and the start of the Berlin Blockade, both in June.[6]

With the approval of the specifications, TsKB-17, the heavy-ship design bureau, began work on the sketch design to be submitted for approval to the Council of Ministers before the start of the technical design could begin. By March 1949, four alternatives had been completed, differing mainly in the arrangement of the 130 mm guns and the boiler layout. The bureau preferred one layout and the Navy and the Shipbuilding Ministry concurred so the bureau began the technical design, without formal approval, in order to be ready to lay down the first two ships in the third quarter of 1950 as already scheduled. However, when Stalin reviewed the sketch design in September 1949, he rejected it, ordering a smaller, faster ship capable of 35 knots (40 mph; 65 km/h). TsKB-17 was able to produce a preliminary technical design that met Stalin's demands by the end of the year, an amazingly fast amount of time for what should have been a very involved process. The most likely explanation is that the designers retained as much of their original work as possible and found room for the more powerful turbines and more numerous boilers necessary to attain Stalin's specified speed by deleting the two rear twin 130 mm turrets, and their magazines, as revealed by a comparison of the 1949 and 1951 sketches.[7]

The Navy didn't like the compromises made to reduce the displacement down to Stalin's 36,000 tonnes (35,000 long tons) and to achieve the high speed demanded as revealed in a March 1950 meeting in the Kremlin where Stalin revealed critical points about his thoughts for these ships. When the admirals responded to his question about the purpose of these ships by saying that they were to fight the enemy's heavy cruisers, he contradicted them and said that their purpose was to fight light cruisers: "It is necessary to increase its speed to 35 knots and create a cruiser that will cause panic among the enemy's light cruisers, disperse and destroy them."[8] Furthermore he believed that they would fight close to home, defending the coastal waters of Soviet Union. "You cannot blindly copy the Americans and English, they face different conditions, their ships travel far over the ocean, out of touch with their bases. We are not considering conducting oceanic battles, but instead will fight close to our own shores, so we do not need a large ammunition supply on the ship."[8] The admirals also did not like the reduction in the secondary armament made to accommodate the larger machinery and extra boilers needed to reach the speed desired by Stalin, but he reminded them that most aircraft would attack the battlecruiser at heights below 1,500 m (4,900 ft) and the ceiling of the 130 mm was far in excess of that. He also ordered a reduction in the light anti-aircraft guns believing that its escorts would defend it. This design was approved by the Council of Ministers on 25 March 1950.[9]

This allowed the technical design process to begin and it was completed in December 1950. Reviews by the Navy and Shipbuilding Ministries in February 1951 led to some significant changes to the design in April. The original form of the bow was similar to that of the Chapayev-class light cruisers, but sea trials of the lead ship of that class in December 1950—January 1951 proved that she was very wet forward, which hindered her seakeeping ability. The Stalingrad's bow form was radically altered with a much more raked stem, its sheer and flare were greatly increased and the ship gained almost 10 m (32 ft 10 in) in length, possibly in response to the Chapayev's problems. In addition the thickness of her belt armor was increased from 150 to 180 mm (5.9 to 7.1 in), possibly in response to weight savings elsewhere. This final design was submitted for approval on 4 June 1951, but preparations for the working design drawings began before it was approved.[10]

Design[]

General characteristics[]

The ships of the Stalingrad class were 260 meters (853 ft 0 in) long at the waterline, and 273.6 meters (897 ft 8 in) long overall. They had a beam of 32 meters (105 ft 0 in), a maximum draft of 9.2 meters (30 ft 2 in) forward, 8.8 meters (28 ft 10 in) aft, and displaced 36,500 tonnes (35,900 long tons) at standard load and 42,300 tonnes (41,600 long tons) at full load. They were the first large Soviet-built ships with a flush deck. The hull was completely welded to save weight and they used longitudinal framing throughout. Metacentric height was estimated at 2.6 m (8 ft 6 in), presumably in the design load condition. The ships had a triple bottom underneath the armored citadel that had a height of 2.25 meters (7 ft 5 in) and 23 main watertight compartments. They had a crew of 1712 men plus space for 30 when acting as a flagship.[11]

The cost for each ship was estimated at 1.168 billion rubles, almost four times the 322 million rubles for a Sverdlov class. The ship was intended to be commanded by a rear admiral, with its executive officer, political officer and the heads of the gunnery and engineering divisions as captains 1st rank.[12]

Propulsion[]

The high speed demanded of the Stalingrads required four TV-4 geared steam turbines, each producing 70,000 shaft horsepower (52,199 kW) and driving one propeller. They were powered by twelve water-tube boilers at a pressure of 66 kg/cm2 (6,472 kPa; 939 psi) at a temperature of 460 °C (860 °F). The machinery was arranged on the unit system so that one hit couldn't knock out all the boilers or all the turbines and immobilize the ship. Two boiler compartments, each with three boilers, were situated underneath the forward funnel, with a turbine compartment for the wing shafts immediately aft and this arrangement was repeated for the two center shafts. 5,000 tonnes (4,900 long tons) of fuel oil were carried which gave a range of 5,000 nmi (9,260 km) at 18 knots (33 km/h). Maximum speed was 35.5 knots (40.9 mph; 65.7 km/h).[12]

Eight 750 kW turbo-generators drove the 380V, 50 Hz electrical system in addition to four 1000 kW Diesel generators located outside each end of the armored citadel for a total capacity of 10,000 kW.[12]

Armor[]

The armor scheme of the battlecruisers was quite complex with armor plates of no less than 25 different thicknesses used. Although only designed to withstand cruiser shellfire no less than 10,400 tonnes (10,200 long tons; 11,500 short tons), or 29% of the total displacement was devoted to armor. The citadel armor was intended to provide an immunity zone against 8 in (200 mm) armor-piercing shells at ranges between 13,000–15,000 yards (12,000–14,000 m) and 34,000 yards (31,000 m). The remainder of the armor was intended to resist 6-inch (150 mm) high explosive shells and 500-kilogram (1,100 lb) HE bombs.[13]

The belt armor was 180 mm (7.1 in) thick and inclined outwards at an angle of 15° to maximize its effectiveness against both plunging and horizontal fire. It had a vertical height of 5.25 m (17.2 ft), 1.7 m (5 ft 7 in) of which was below the design waterline. It covered approximately 60% of the ship's waterline or about 156 m (512 ft). 50 mm (2.0 in) of armor covered the hull side above the belt as protection from splinters. The forward end of the armored citadel was closed off by a 140-millimeter (5.5 in) thick transverse bulkhead on the forward end and 125 mm (4.9 in) aft. The deck armor in the citadel ranged in thickness, from 50 mm (2.0 in) for the upper deck, a 70-millimeter (2.8 in) middle deck—increased to 75 mm (3.0 in) over the handling rooms for the 130-millimeter (5.1 in) gun turrets—and a lower splinter deck of 15 mm (0.59 in), which increased outboard to 20 mm (0.79 in). The waterline forward of the citadel was protected by a 50-millimeter (2.0 in) splinter belt all the way to the bow, with a similar extension aft to the steering gear compartment. The middle deck behind this splinter belt was 50 mm (2.0 in) thick. The steering gear was protected by 170 mm (6.7 in) of armor on the sides, a 70–100-millimeter (2.8–3.9 in) deck and a 200-millimeter (7.9 in) armored bulkhead aft.[13]

Additional armored plates were fixed to the third bulkhead of the underwater protection system to protect against diving shells hitting below the level of the waterline belt. Their thicknesses varied depending on location and ranged oddly from 100 mm (3.9 in) amidships to 20 mm (0.79 in) over the 305 mm (12.0 in) magazines. The main battery turrets were protected by 240 mm (9.4 in) of armor on the faces and 225 mm (8.9 in) on the sides and 125 mm (4.9 in) of armor on the roofs. Their barbettes had a maximum of 235 mm (9.3 in) on their forward faces and 200 mm (7.9 in) on the after face. Below the main deck they were protected by only 195–155 mm (7.7–6.1 in) of armor. The 130 mm turrets were only protected by 25 mm (0.98 in) of armor as splinter protection.[13]

The forward conning tower had a forward face of 250 mm (9.8 in) that thinned down to 225 mm (8.9 in) on the aft section with a 100-millimeter (3.9 in) roof. Its controls and cable runs were protected by a 100-millimeter (3.9 in) tube and the lower part of the conning tower's supporting structure was protected with 20 mm (0.79 in) plates. Aft there was a lightly protected auxiliary control station with 50-millimeter (2.0 in) sides. Between the middle and lower decks the funnel uptakes were protected by 100 mm (3.9 in) of armor and 30 mm (1.2 in) between the upper and middle decks. A 125-millimeter (4.9 in) upper and 175-millimeter (6.9 in) lower grating protected the boilers from shells and fragments entering through the uptake openings.[14]

The torpedo protection system was developed on the basis of model tests and full-scale trials using the incomplete hull of the prewar battlecruiser Kronshtadt and was expected to resist a torpedo warhead equivalent to 400–500 kg (880–1,100 lb) of TNT. It was made up of an external bulge with four longintudinal bulkheads. The first was 8–15 mm (0.31–0.59 in) thick, the second was 8–25 mm (0.31–0.98 in), the third was 50 mm (2.0 in) and the fourth 15–30 mm (0.59–1.18 in). Presumably the thinner thicknesses were at the ends of the ships where the bulkheads were squeezed together. The outer space was left empty, but the two middle spaces were filled with oil that was intended to be exchanged with sea water as it was consumed, and the inner space was also to be left empty. One curious feature was that the first and second bulkheads were concave in profile. Apparently this was believed to improve their protective qualities, although there is no indication of how it did this. "The total depth of the system was about 4–4.5 m (13–15 ft) amidships, which seems rather shallow."[12] The triple bottom underneath the armored citadel was believed to protect the ship against a charge equivalent to 500 kg (1,100 lb) of TNT five meters below the ship's hull.[12]

Armament[]

Rather than use the Tsarist-era 305-millimeter (12.0 in) MK-3-12 gun as originally planned, or use the 305-mm/54 guns ordered for the Kronstadt, it was decided in 1947 to adopt a new and more powerful 61-caliber gun of the same size that was to use three newly designed triple SM-6 turrets. Each individual gun weighed 101.58 t (99.98 long tons; 111.97 short tons) and the complete turret weighed 1,370 t (1,350 long tons; 1,510 short tons). The guns could be depressed to −4° and elevated to 50° at a rate of 10° per second. Traverse speed was 4.5° per second and each turret was ordinarily remotely controlled from the More-82 main fire control director, but could be locally controlled if necessary. They fired 467-kilogram (1,030 lb) shells at a muzzle velocity of 950 m/s (3,100 ft/s) to a maximum range of around 53,070 m (58,040 yd) using 209 kg (461 lb) of propellant. Their rate of fire was 3.26 rounds per minute and 80 rounds were stowed aboard for each gun. One barrel was completed in December 1953 for evaluation purposes after the ships were canceled earlier that year.[15]

The 130-mm 58-caliber guns were also a new design. They were to be fitted in a new twin-gun BL-109A dual-purpose mount. Each individual gun weighed 4.88 t (4.80 long tons; 5.38 short tons) and the complete turret weighed 65.2 t (64.2 long tons; 71.9 short tons). The guns in this mount could depress to -8° and elevate to 83° at a rate of 20° a second. Traverse speed was 20° per second. The guns fired 33.4-kilogram (74 lb) shells at a muzzle velocity of 950–1,000 m/s (3,100–3,300 ft/s) to a maximum horizontal range of 32,390 m (35,420 yd) using 12.92 kg (28.5 lb) of propellant. Their rate of fire was 15 rounds per minute and 200 rounds were stowed for each gun.[16]

Twenty-four 45-millimeter (1.8 in) 78-caliber light anti-aircraft guns were to be carried by the Stalingrads in six quadruple SM-20-ZIF power-driven, fully enclosed mounts. Two mounts were fitted on each side of the forward funnel and the last two were superimposed above the rear main gun turret. Each individual gun weighed 402.8 kg (888 lb) and the complete mount weighed 9.75 t (9.60 long tons; 10.75 short tons). The guns in this mount could depress to -13° and elevate to 85° at a rate of 25° a second. Traverse speed was 30° per second.[17] The gun fired 1.41-kilogram (3.1 lb) shells at a muzzle velocity of 1,080 m/s (3,500 ft/s) to a maximum horizontal range of 12,000 m (13,000 yd). Its rate of fire was 75 rounds per minute and 800 rounds were carried for each gun.[16]

Forty 25-millimeter (0.98 in) 79-caliber AA guns were carried in ten quadruple powered BL-120 mounts. These were designed especially for the Stalingrads and were fully, if lightly, armored against splinters. Each individual gun weighed 101 kg (223 lb) and the complete mount weighed 4 t (3.9 long tons; 4.4 short tons). The guns in this mount could depress to -5° and elevate to 90° at a rate of 25° a second. Traverse speed was 70° per second. The gun fired .281-kilogram (0.62 lb) shells at a muzzle velocity of 900 m/s (3,000 ft/s) to a maximum effective range of 2,400–2,800 m (2,600–3,100 yd).[18] Its effective rate of fire was 240 rounds per minute and 1200 rounds were carried for each gun.[19]

Electronics[]

Target data for the More-82 director was derived from the Zalp (NATO designation Half Bow) fire-control radar and Grot rangefinding radars mounted on turrets Nos. 2 and 3. These were backed up by a single KDP-8-10 optical director mount fitted with 8-meter (26 ft) and 10-meter (33 ft) rangefinders. Some of the BL-109A mounts were to fitted for range-finding radars, probably Shtag-B (NATO designation Egg Cup), but they were ordinarily controlled by three SPN-500 directors, one for each pair of gun mounts. The SPN-500s carried a 4-meter (13 ft) rangefinder as well as Yakor (NATO designation Sun Visor) fire-control radar. Air search capability was provided by the Fut-N (NATO designation Slim Net) radar with anti-aircraft fire control provided by Fut-B (NATO designation Hawk Screech) radars.[19]

The main air-search radar was the Giuis-2 (NATO designation Cross Bird), a Soviet development of the wartime British Type 291 radar. It had a range of 80 km (50 mi) against aerial targets and 20 km (12 mi) against surface targets. The main surface-search radar was Rif-A (NATO designation Ball End) that had a range of 40 km (25 mi) against surface targets. The Stalingrads also had Neptun and Nord navigational radars. Soviet electronics were still fairly primitive during this period and the trials of the light cruiser Sverdlov, which carried many of these systems, revealed that the effective range of the Rif-A surface-search radar was less than that of the Yakor and Zalp fire-control radars. There were also problems transferring data from the Giuis-2 air-search radar to the Yakor and Fut-B anti-aircraft fire-control radars, which was a serious problem when dealing with high-speed aircraft. The Giuis-2 also interfered with ultra-shortwave radio reception.[12]

Korall radar-jammers were mounted on either side of the mainmast as well as a Machta system on the foremast. Solentse-1P infrared detectors were carried on either side of the superstructure. Fakel-MO and Fakel-MZ antenna comprised the IFF system. A Gerkules sonar was also fitted in addition to various radio direction finders.[12]

Missile variant[]

The TsKB-17 design bureau proposed variants of the design with both cruise and ballistic missiles. The ballistic missiles would have been launched from vertical tubes replacing the forward turrets, and in one version, the entire main armament. The proposal was dropped because both types would have needed a fully stabilized launching platform to give them any chance of hitting their targets and that the ballistic missiles would need three hours of preparation time.[20]

Construction[]

Three ships were started:

Ship hull number builder Laid down (official) Launched Scheduled completion
Stalingrad (Russian: Сталинград) 0-400 Marti Yard, Nikolayev 31 December 1951 16 March 1954 1954
Moskva (Russian: Москва) 0-406 Baltic Yard, Leningrad September 1952 n/a 1955
Kronstadt? (Russian: Кронштадт) 0-401 Molotovsk October 1952 n/a ?

The first sections of Stalingrad had been laid down in November 1951 in Slipway "O" of the Marti South Shipyard in Nikolayev where a Sovetsky Soyuz-class battleship, Sovetskaya Ukraina, had begun construction in 1938,[21] but the slipway itself was in need of reconstruction and its lower end was occupied by the hull of the Sverdlov-class light cruiser Mikhail Kutuzov which was scheduled for launch at the end of 1952. Moskva's keel was laid down in September 1952 by the Baltic Works in Leningrad. The unnamed third ship was laid down at Yard 402, at Molotovsk around October 1952, Soviet sources refer to her proposed names as the Kronshtadt or Arkhangelsk. A fourth ship was apparently ordered from Yard 402, but was never laid down.[22]

Stalingrad's formal keel-laying was on 31 December 1951 and it was hoped that she could be launched on 6 November 1953, the eve of the 36th anniversary of the October Revolution. But deliveries of steel, armor, machinery and other equipment were delayed or arrived out of sequence, despite extraordinary efforts by the Ministry of Shipbuilding, and slowed construction enough so that she fell about six months behind schedule and the same was more or less true for the other ships. By 1 January 1953 Stalingrad was intended to be 42.9% complete, but was actually only 18.8% done. Moskva was planned to be 11.5% finished, but was only 7.5% done. And the unnamed ship was intended to be 5.2% along, but was only 2.5% complete.[23]

These ships were canceled on 18 April 1953, after Stalin's death on 5 March, by the Ministry of Transport and Heavy Machinery,[23] and the hulls of Moskva and the third ship were scrapped on the slipways later that year. The Ministry ordered in June that Stalingrad's hull, which was about 70% ready for launching, be used for weapons tests. Her hull was launched on 16 April 1954 and her stern, which was more or less complete, was dismantled—her bow hadn't been built when work was suspended a year earlier—and the central, 150-meter (490 ft) long, section was modified for her new role.[24]

Career as a target hulk[]

Stalingrad's hull was towed from Nikolayev on 19 May 1955 by three tugs, but was driven ashore by high winds on 23 May at the southern entrance to Sevastopol Bay. She grounded on a very rocky bottom in very shallow water only about 50 m (160 ft) from shore. A number of the ordinary methods to refloat a ship couldn't be used because she was very nearly empty and so nothing could be off-loaded and the rocky bottom meant that it couldn't be excavated out from underneath her. The first attempt used brute force provided by the cruisers Molotov and Kerch to unsuccessfully tow her off. Several other attempts were made using explosive charges to create shock waves that would pivot her stern into deeper water in combination with tugs attempting to pull her around, but these were counterproductive in that several holes were blown in her sides which flooded several compartments and grounded her that much more firmly. At this time a more detailed assessment was made of the situation and 259 steel projections were discovered on the underside of her hull, left over from her launching cradles. These ranged in length from 40–169 mm (1.6–6.7 in) and totally invalidated all calculations about the amount of force required to free her.[25]

The capsizing of the battleship Novorossiysk in Sevastopol harbor on 29 October 1955 delayed salvage operations on the Stalingrad until the end of the year. The hull had to be patched, the water pumped out and all the projections removed to raise the stern slightly with pontoons, pivot into deeper water, then trim it down to elevate the bow off the bottom and pull it free. These preparations were very time-consuming and it wasn't until mid-July 1956 that it could be pulled off the rocks into Sevastopol harbor where she was given more permanent repairs. She was then moved to the Naval Firing Range between Yevpatoria and Sevastopol where it was used as a target for seven P-1 or KSS anti-ship missiles fired from the converted Sverdlov-class cruiser Admiral Nakhimov in December 1956. The missiles penetrated the upper and main decks and devastated the upper hull, but there was no appreciable change in the ship's draught. Details are not known about other tests, although she reportedly served as a target for P-15 Termit (SS-N-2 Styx) missiles and a wide variety of armor-piercing munitions. By the early 1960s her usefulness had come to an end and she was scrapped, possibly in 1962.[26]

Notes[]

  1. Sturton, p. 143
  2. 2.0 2.1 2.2 McLaughlin, p. 103
  3. "Class cruiser "STALINGRAD" Проект 82 Project 82" (in Russian). "Katrin". Archived from the original on 18 July 2012. https://archive.is/o43g. Retrieved 26 August 2009. 
  4. McLaughlin, pp. 103–4
  5. 5.0 5.1 McLaughlin, p. 104
  6. McLaughlin, pp. 105–106, 108
  7. McLaughlin, pp. 108–109
  8. 8.0 8.1 McLaughlin, p. 109
  9. McLaughlin, pp. 109–10
  10. McLaughlin, p. 110
  11. McLaughlin, pp. 110–11, 115
  12. 12.0 12.1 12.2 12.3 12.4 12.5 12.6 McLaughlin, p. 115
  13. 13.0 13.1 13.2 McLaughlin, p. 114
  14. McLaughlin, pp. 114–15
  15. McLaughlin, pp. 110–11
  16. 16.0 16.1 McLaughlin, pp. 110, 113
  17. "Russia 45 mm/78 (1.77") SM-7". Navweaps.com. 18 July 2006. http://www.navweaps.com/Weapons/WNRussian_45mm-78_SM-7.htm. Retrieved 26 August 2009. 
  18. "Russia / USSR 25 mm/79 (1") 110-PM (gun) 25 mm/79 (1") 2M-3 (mounting) 25 mm/79 (1") 2M-8 (mounting) --- People's Republic of China 25 mm/60 Type 61". Navweaps.com. 21 November 2007. http://www.navweaps.com/Weapons/WNRussian_25mm-79_2m-3.htm. Retrieved 26 August 2009. 
  19. 19.0 19.1 McLaughlin, p. 113
  20. McLaughlin, pp. 106, 108
  21. Garzke and Dulin, p. 337
  22. McLaughlin, p. 116
  23. 23.0 23.1 McLaughlin, p. 117
  24. McLaughlin, p. 118
  25. McLaughlin, p. 119
  26. McLaughlin, pp. 119–120

References[]

  • Garzke, William H.; Dulin, Robert O. (1980). Battleships: Allied Battleships in World War II. Annapolis, Maryland: Naval Institute Press. ISBN 0-87021-100-5. OCLC 6355577. 
  • McLaughlin, Stephen (2006). "Project 82: The Stalingrad Class". In Jordan, John. Warship 2006. London: Conway. pp. 102–123. ISBN 978-1-84486-030-2. 
  • Sturton, Ian, ed (1987). Conway's All the World's Battleships: 1906 to the Present. London: Conway Maritime Press. ISBN 0-85177-448-2. OCLC 246548578. 

External links[]




All or a portion of this article consists of text from Wikipedia, and is therefore Creative Commons Licensed under GFDL.
The original article can be found at Stalingrad-class battlecruiser and the edit history here.