|25pdr SP, tracked, Sexton|
Sexton on exhibition in the Polish Army Museum in Warsaw; this particular vehicle was used during WWII by the Polish 1st Armoured Division
|Place of origin||Canada|
|In service||1943 - 1956|
|Used by|| Canada|
|Wars||Second World War|
|Manufacturer||Montreal Locomotive Works|
|Variants||Mark I, Mark II|
|Weight||25 long ton (25.86 tonnes)|
|Length||20 ft 1 in (6.12 m)|
|Width||8 ft 11 in( 2.71 m)|
|Height||8 ft (2.44 m)|
|Crew||6  (Commander, Driver, Gunner, Gun-Layer, Loader, Wireless Operator)|
|Elevation||+40° to -9°|
|Traverse||25° left 15° right1|
|Armour||up to 32 mm|
|Ordnance QF 25 pounder (87.6 mm) Mk II |
105 rounds (mostly HE) carried on board
|Two 0.303 (7.7 mm) Bren light machine guns|
50 30-round magazines
|Engine||Continental R-975 9 cylinder Radial gasoline |
400 hp (298 kW)
|Suspension||Vertical volute spring|
|125 miles+ (200 km)|
|Speed||25 mph (40 km/h)|
The 25pdr SP, tracked, Sexton was a self-propelled artillery vehicle of World War II, based on an American tank hull design, built by Canada for the British Army, and associated Commonwealth forces, and some of the other Allies.
It was developed to give the British Army a mobile artillery gun using their Ordnance QF 25 pounder gun-howitzer. From 1943 it replaced the US built M7 Priest (US 105 mm guns on a M3 Lee tank chassis); these had replaced the British Bishop (25 pdr on Valentine tank chassis) which had been improvised in 1942.
In 1942, the US supplied enough M7 Priest self-propelled howitzers to equip a number of British Army artillery units in fighting in North Africa. The British found the Priest to be an excellent weapon, which gave artillery the same mobility as tank units. However, the Priest used the American 105 mm howitzer rather than the British equivalent, the QF 25 pounder gun-howitzer. Having to supply different ammunition for a few units complicated supply for the British Army. The US attempted to fit a 25 pounder to the M7 Priest - producing the T51 in mid 1942 - but the program suffered delays including the destruction of the gun mount on the prototype during the first live-firing exercises. US resources were not available for a vehicle solely for British use so Britain turned to Canada.
The Canadian Army Engineering Design Branch through the Canadian government's Department of Munitions and Supply were asked to build a vehicle similar to the M7 on the Ram tank chassis. The Ram tank was a Canadian tank design that used the chassis of the American Medium Tank M3 as did the Priest. The Ram had been sidelined by a decision to standardize on the Sherman tank for British and Canadian units. A prototype was completed on 23 June 1942. Following trials in Canada, the Canadian government ordered 124 vehicles in three batches. The prototype was shipped to the United Kingdom in early 1943, where it underwent further trials; the vehicle was found to be highly satisfactory and was given the designation "Sexton" (after the religious custodian) in May 1943. The British government ordered 300 Sextons in the summer of 1943; however, these Sextons were to be built on Grizzly tank hulls (Canadian-built M4A1 Sherman tanks) instead of Ram tank hulls. The Ram-based Sexton was designated as the Sexton Mark I and the Grizzly-based Sexton was designated the Sexton Mark II. British orders for the Sexton II eventually totalled 2,026 vehicles. Unlike the Ram, which was inferior operationally to the Sherman and never saw combat as a gun tank, the Sexton was successful. Between 1943 and 1945, the Montreal Locomotive Works manufactured a total of 2,150 Sextons for the use of both Canadian and British forces. The vehicle entered service in September 1943. The vehicles were first used in combat in Italy by the British Eighth Army. Later Sextons took part in the invasion of France and subsequent Battle of Normandy and the campaign in north-western Europe. During the D-day landings a number of Sextons were ordered to fire from their landing craft as they approached the beaches although the fire did not prove to be very accurate. In spite of its confused origins, the Sexton was a combination of proven parts and proved to be a successful design and remained in British service until 1956.
Unlike Germany, which often used its self-propelled guns (assault guns) in a front line direct fire role, Britain and Canada only used the Sexton for indirect supporting fire. They kept the Sextons well back from the front line and used forward observers to direct overwhelming fire on a target.
- Sexton I
- The first 125 vehicles manufactured. Based on the Ram tank hull.
- Sexton II
- Boxes added to the rear deck to carry batteries and an auxiliary generator to charge them. Based on the Grizzly (M4A1 Sherman) hull.
- Sexton GPO (Gun Position Officer)
- The 25 pounder was removed and an extra No. 19 Wireless was added along with map tables; this vehicle was used to control battery fire.
- Yeramba - an Australian amoured vehicle of the 1950s mounting of 25 pounder on an M3 hull.
- Livesey, Jack (2007). Armoured Fighting Vehicles of World Wars I and II. Southwater. pp. 106–107. ISBN 978-1-84476-370-2.
- also "Mounting, SP, 25-pdr, C, Mk I"
- AFV Profile "Ram and Sexton"
- Stacey, C. P. (1970). Arms, Men and Government: The War Policies of Canada, 1939 - 1945. The Queen's Printer by authority of the Minister of National Defence. pp. 513–514. http://www.cmp-cpm.forces.gc.ca/dhh-dhp/his/docs/AMG_e.pdf.
- AFV Profile
|Wikimedia Commons has media related to Sexton.|
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|