|Ryan ST series|
|A restored Ryan NR-1|
|Manufacturer||Ryan Aeronautical Company|
|Designer||T. Claude Ryan|
|First flight||8 June 1934|
|Primary users||United States Army Air Forces|
Netherlands East Indies Army and Navy
Royal Australian Air Force
|Variants||Ryan PT-22 Recruit|
The Ryan STs were a series of two seat, low-wing monoplane aircraft built by the Ryan Aeronautical Company. They were used as sport aircraft, as well as trainers by flying schools and the military of several countries.
Design and development
T. Claude Ryan was the founder of the Ryan Aeronautical Company, the second incarnation of a company with this name, and the fourth company with which he had been involved to bear his name (the first, Ryan Airlines, was the manufacturer of the Ryan NYP, more famously known as the Spirit of St. Louis). He began the development of the ST (for "Sport Trainer", and also known as S-T), the first design of the company, in 1933.
The ST featured two open cockpits in tandem in a metal semi-monocoque fuselage of two main frames - one steel, the other half of steel and half of aluminium alloy (alclad) - to take the loads from the wing spars and six more alclad frames; and alclad skin. It had wings in three sections of hybrid construction; the centre section integral with the fuselage had tubular steel spars, the front spar a simple tube with an external brace to the upper fuselage, and the rear spar in the form of a parallel chord truss. The two outer wing panels had wooden spars and alclad ribs, with diagonal rods bracing the wings internally. Alclad sheet was used to form the leading edges, and fabric covered the whole structure. When attached the outer wings were braced with flying wires to the fixed conventional landing gear and landing wires to the upper fuselage.
Five STs were built before the follow-on ST-A (also S-T-A) (A for Aerobatic) was developed with a more powerful engine. A single ST-B was produced, this being an ST-A with only one seat and an extra fuel tank where the front cockpit normally was; this aircraft was subsequently converted back to ST-A standard. The ST-A was further developed as the ST-A Special, with an engine of increased power.
In 1937 the ST-A Special was developed into a military version, the STM (also ST-M) series. Changes included wider cockpits to enable military pilots to enter and exit while wearing parachutes, and provision for a machine gun on some examples. Variants in the series included the STM-2P single-seat version armed with a machine gun delivered to Nationalist China; and the STM-S2, which could be fitted with landing gear or with EDO Model 1965 floats.
After the ST-M came the ST-3, a substantial redesign in 1941 partly brought about by the unreliability of the Menasco engines fitted to STs to that point. The United States Army Air Corps (USAAC) had purchased several dozen ST-M variants under various designations and had Ryan Aeronautical re-engine most with Kinner R-440 radial engines. The USAAC found the modification to be beneficial and asked Ryan Aeronautical to design a variant with this engine as standard, and with airframe modifications considered desirable from in-service experience. The ST-3 that resulted featured a longer and more circular wider fuselage, this being suggested by the circular radial engine. Other changes included a revised rudder, balanced ailerons and elevators, and strengthened main landing gear with the legs spaced further apart. The streamlining spats covering the mainwheels, found on ST series aircraft to that point, were deleted as well. The ST-3 served as the basis for military versions ordered by the USAAC and the United States Navy (USN).
The ST-3 gave rise to another model developed in 1941 and early 1942, this was the ST-3KR (for Kinner Radial). The ST-3KR had a more powerful Kinner R-5 engine fitted and became the definitive model; more than 1,000 military versions were built during World War II as PT-22 Recruits. The final variant was the ST-4, which was a version of the ST-3 with a wooden fuselage, developed in case a shortage of "strategic materials" (i.e. of metal) developed. Such a shortage did not eventuate and the ST-4 was not put into mass-production.
Some U.S. Navy versions of the ST-3, the NR-1, were converted to specialized ground trainers to teach cadets how to taxi aircraft when on the ground or after landing, and especially in crosswinds. The main wing was clipped back to the landing gear; a small nose wheel added to prevent ground loops; a roll cage between cockpits to protect the pilot and cadet; and the throttle modified so the engine could not go over a certain RPM.
The first Ryan ST flew for the first time on 8 June 1934 and production began the following year, when nine aircraft were delivered. Except for 1937 (when 46 aircraft were built), production rates remained low for several years, at about one aircraft every two weeks. This changed in 1940 when deliveries to military forces began in earnest; production that year was just under three aircraft per week. Total production of civil and military aircraft prior to the entry of the United States into World War II amounted to 315. Another 1,253 military versions were produced in 1942 and 1943, for a total of 1,568 aircraft of all models.
Most civil aircraft in the ST series were delivered in the United States, although a few were exported to South Africa, Australia and various countries in Latin America. An example of the ST-A was procured by the USAAC in 1939 for evaluation as the XPT-16. This was followed by 15 YPT-16s, the first time the USAAC had ordered a monoplane trainer. These were the first of more than 1,000 Ryan STs to serve the USAAC, its successor, the United States Army Air Forces (USAAF) and the USN.
A large number of STMs were exported in the 1930s and early 1940s (prior to the entry of the United States into World War II) to various Air forces, with the biggest customer being the military of the Netherlands East Indies (NEI, now Indonesia). The NEI Army and Navy took delivery of 84 STM-2s and 24 STM-S2s in 1940 and early 1941.[N 1] Another 50 STM-2Es and STM-2Ps were exported to Nationalist China, while others were exported to Bolivia, Ecuador, Guatemala, Honduras, Mexico and Nicaragua.
After the Japanese invasion of the NEI many Ryans in that country were pressed into combat, especially in reconnaissance roles, and large numbers were shot down or destroyed on the ground. Surviving STM-2s and STM-S2s that were not captured by the Japanese were shipped to Australia, where 34 entered service in the Royal Australian Air Force as trainers. Many of those that survived until the end of World War II were then placed on the civil register in Australia and elsewhere, and some are still flying almost 70 years after they were built.
- Prototype and first model, fitted with a Menasco B4 engine of 95 hp; five built.
- Improved ST designed for aerobatics, fitted with a Menasco C4 engine of 125 hp; 73 built.
- ST-A Special
- Improved ST-A, fitted with a Menasco C4S engine of 150 hp; 10 built.
- Single-seat variant of ST-A with extra fuel tank in place of front cockpit; one built, later converted to ST-A.
- Military version of ST-A Special with wider cockpits, some with provision for a machine gun; 22 built.
- Variant of STM for Netherlands East Indies Army and Navy; 95 built.
- Variant of STM delivered to China, fitted with a Menasco C4S2 engine of 165 hp; 48 built.
- Single-seat variant of the STM-2E with provision for a machine gun, also delivered to China; 2 built.
- Variant of STM-2 with interchangeable wheel landing gear or floats for Netherlands East Indies Navy; 13 built.
- Experimental conversions, with a Warner Scarab radial engine; one converted from USAAC YPT-16 with Scarab of 125 hp; one converted from USAAC PT-20A with Super Scarab of 160 hp.
- Variant with new fuselage shape and a Kinner B-5 radial engine of 125 hp; one built.
- Variant of ST-3 with a Kinner R-5 radial engine of 160 hp, one built.
- Variant of ST-3 manufactured with wooden fuselage; one built.
US military designations
- XPT-16: A single ST-A bought by the USAAC for evaluation.
- XPT-16A: XPT-16 re-engined with Kinner R-440 radial engine of 125 hp.
- YPT-16: A total of 15 aircraft similar to the ST-M ordered for service trials.
- PT-16A: 14 YPT-16s re-engined with Kinner R-440 engine.
- PT-20A: Designation of PT-20s that were re-engined with Kinner R-440 engines.
- Military production version of ST-3; 100 built.
- PT-22 Recruit
- Military production version of ST-3KR with Kinner R-540-1 engine; 1,048 built, including PT-22As.
- PT-22A: Designation for 25 examples of ST-3KR built for the Royal Netherlands Air Force but not delivered, aircraft subsequently taken by the USAAF.
- PT-22C: Aircraft re-engined with Kinner R-540-3 engines, 250 aircraft modified.
- Naval production version of ST-3; 100 built.
Numbers used from World Air Forces
- Royal Australian Air Force operated 34 ex-Netherlands examples that had escaped capture by the Japanese from 1942 to 1945
- Bolivian Air Force operated one from 1939 to 1944
- Republic of China (1912–1949)
- Republic of China Air Force operated 120 from 1940 to 1942
- Ecuadorian Air Force operated 10 from 1941
- Guatemalan Air Force operated 12 STA specials from 1938 to 1958
- Honduran Air Force operated three STA specials from 1938 to 1943
- Imperial Japanese Army Air Service operated an unknown number captured from the Netherlands
- Mexican Air Force operated six STA specials from 1937 to 1947
- Royal Netherlands East Indies Army Air Force operated 60 STM-2/STM-S2 from 1940 to 1942
- Royal Netherlands Navy operated 48 STM-2/STM-S2s from 1941 to 1942
- Nicaraguan Air Force operated one STA special during 1938
- South Africa
- South African Air Force operated three from 1939
- United States Army Air Corps and United States Army Air Forces operated 1,224 of all versions from 1939 until 1946
- United States Navy operated 100 NR-1s (PT-22) from 1940 until 1944
- Crew: one, pilot
- Capacity: 1 passenger
- Length: 21 ft 5 in (6.53 m)
- Wingspan: 30 ft 0 in (9.15 m)
- Height: 9 ft 2 in (2.79 m)
- Wing area: 124 ft² (11.5 m²)
- Empty weight: 1,081 lb (490 kg)
- Loaded weight: 1,600 lb (726 kg)
- Powerplant: 1 × Menasco C4, 125 hp (93 kW)
- Maximum speed: 126 mph (203 km/h)
- Range: 366 miles (589 km)
- Service ceiling: 17,200 ft (5,243 m)
- Rate of climb: 800 ft/min (244 m/min)
- Wing loading: 13 lb/ft² (63 kg/m²)
- Power/mass: 0.08 hp/lb (0.13 kW/kg)
- Orphan is in disagreement with the other sources. In the article, "The Ryan ST in Australia", he quotes different numbers to each arm and a different mix of the two types (60 STM-2s to the NEI Army and 48 STM-S2s to the NEI Navy) but the same overall number of deliveries.
- Russell, Stuart. "Ryan Stm-S2." New Zealand Warbirds, 2002. Retrieved: 10 January 2008.
- Gunston, Bill. Jane's Fighting Aircraft of World War II. London: Bracken Books, 1989. ISBN 1-85170-199-0.
- Holcomb, Kevin. "Ryan ST Construction description." Holcomb's Aerodrome. Retrieved: 23 January 2008.
- Taylor, M. J. H. ed. Jane's Encyclopedia of Aviation. London: Studio Editions Ltd., 1989. ISBN 1-85170-324-1.
- "Ryan." Aerofiles.com, 13 March 2009. Retrieved: 23 January 2008.
- Orphan, Graham M. "The Ryan ST in Australia (and the survivors of the breed)". Classic Wings Downunder magazine, Volume 7, No. 4, September/October 2000, pp. 26–29. ISSN 1172-9643.
- "Ryan ST series pre-war production figures." airminded.net. Retrieved: 15 January 2008.
- Mondey 2006, pp. 224–225.
- "Navy Planes altered to protect cadet fliers." Popular Mechanics, December 1944, p. 32.
- "Ryan ST serial number list." Aerofiles, 13 March 2009. Retrieved: 23 January 2008.
- Donald 1997, pp. 792–793.
- Holmes, Tony. Jane's Historic Military Aircraft Recognition Guide. London: HarperCollins, 1998. ISBN 0-00-472147-0.
- "YPT-16." National Museum of the United States Air Force. Retrieved: 23 January 2008.
- "Ryan STM-S2." Temora Aviation Museum. Retrieved: 4 August 2013.
- "Ryan serials." ADF Serials. Retrieved: 23 January 2008.
- Heyman, Jos. "NEI Aircraft in Australia". ADF serials, pp. 11–13. Retrieved: 23 January 2008.
- "Ryan ST-A Type Certificate." FAA. Retrieved: 23 January 2008.
- "Ryan ST-A Special Type Certificate." FAA. Retrieved: 23 January 2008.
- "Ryan ST-3KR Type Certificate." FAA. Retrieved: 23 January 2008.
- Baugher, Joe. "USAAF PT-22C Serial Number list." USAAF Serial Number lists, 26 January 2013. Retrieved: 23 January 2008..
- "USAAF YPT-25 Serial Number list." USAAF Serial Number lists, 26 January 2013. Retrieved: 23 January 2008.
- "Countries Index." World Air Forces. Retrieved: 4 August 2013.
- Cassagneres, Ev. The New Ryan: Development and History of the Ryan ST and SC. Eagan, Minnesota: Flying Books, 1995. ISBN 978-0-91113-920-4.
- Donald, David, ed. Encyclopedia of World Aircraft. Etobicoke, Ontario, Canada: Prospero Books, 1997. ISBN 1-85605-375-X.
- Mondey, David. American Aircraft of World War II (Hamlyn Concise Guide). London: Bounty Books, 2006. ISBN 978-0-7537-1461-4.
- Pilots Flight Operating Instructions for Army Model PT-22 Airplanes, T.O. NO. 01-100GC-1. Wright-Patterson AFB, Ohio: U.S. Army Air Forces, 1943.
- United States Air Force Museum Guidebook. Wright-Patterson AFB, Ohio: Air Force Museum Foundation, 1975.
|Wikimedia Commons has media related to Ryan ST.|
- The Ryan ST page
- Popular Mechanics, February 1943, "Plywood Trainer Saves Metal for Warplanes" shows ST-4 wooden construction
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|