Military Wiki
Panzer Assault Badge
Panzer badge.jpg
Panzer Badge
Awarded by Nazi Germany
Type Badge
Eligibility Military personnel
Awarded for recognizing the achievements of Panzer personnel who took part in armored assaults
Campaign World War II
Status not awarded
Established 20 December 1939
~22000 (Silver)
~12550 (Bronze)

Correct wearing of the Panzer Badge by Major Erich Löwe

The Panzer Badge (German: Panzerkampfabzeichen) was a German medal awarded to armour troops during World War II. It was introduced during World War II in December 1939 (although first introduced during the Great War and including another version from the Spanish War).[1]


The Tank Combat Badge, or Panzer Badge, first existed in the German Army during World War I, and was later issued again after the Spanish Civil War.[2]

The World War I version showed a German A7V tank within a wreath surmounted by a Totenkopf ("death's head").

The Panzer Badge was introduced on December 20, 1939, in order to recognize the achievements of Panzer personnel who took part in armored assaults. It was designed by Wilhelm Ernst Peekhaus of Berlin, and was instituted by order of Generaloberst Walther von Brauchitsch. On June 6, 1940, a separate class of the badge, in Bronze, was added in order to recognize the crews of armored vehicles other than tanks.[2] The badge was presented in a paper packet with the name of the award printed on the outside. The award document that was awarded with it was the common type that had the particulars of the recipient (rank, name) and the authorizing signature of an officer. The Panzer Badge was worn on the left tunic pocket.[2] The Bronze Panzer Badge was authorized for armored personnel and Panzergrenadier units equipped with armored vehicles.[3] It was also to be presented to members of armored reconnaissance groups and rifle battalions of Panzer divisions. The authorization of these badges was usually done at a regimental or divisional level.[4]

Panzer Battle Badge

The Panzer Badge consists of an oval with a wreath composed of five single oak leaves on one side and four on the other (the tank treads cover one). At the base of the oval is a tie, and on top is the Wehrmacht eagle, which has downspread wings and is clutching a swastika in its talons. In the center of the badge is a tank that passes from left to right. The left track of the tank goes into the wreath of oak leaves, and the area under the tank is grooved and made to look like grass.[2] The reverse of the badge has three variations, the badge could either be hollow backed, flat, or semi-dished. The hollowed backed variation showed the imprint of the obverse, while the flat was just solid (pictured here). The semi-dished version has a slight indent that shows part of the outline of the tank. The badge was attached to the uniform via a hitch and hook, which were affixed to the reverse and had a couple of variations. There was the conventional soldering of a small rectangular medal bar (pictured here), as well as the more rare type in which a circular ball hinge was inserted into the body of the badge.[2] The tank in the center of the medal is a Panzerkampfwagen IV.[4] The criteria for the award of the Silver Panzer Badge were, to have taken part in 3 armored assaults on 3 different days, to have been wounded in an assault, to have won a decoration for bravery in an assault.[Clarification needed] The Silver class was presented to tank commanders, gunners or radio operators while the bronze class was presented to the Panzergrenadier regiments, tank assault crew, armored reconnaissance units, and medical personnel who went into battle in armored vehicles. The award was authorized through the Panzer Division commander.[2]

Tank Badge 25, 50, 75, 100

As the war continued it became apparent that the single Panzer Badge was no longer adequate to recognize the growing number of veterans with years of experience, and in June 1943 four new classes of the award were introduced for 25, 50, 75 and 100 engagements.[2] These new badges consisted of an award that was similar to the unnumbered Panzer Badge, but with a box showing the Arabic numeral of the class at the base of the wreath. The badge was slightly larger for the 25 and 50 type with the 75 and 100 being larger still.[2] The wreath in the case of the 25 and 50 was silvered, while in the 75 and 100 class it was gilt. The center of the badge (the tank) was made of a separate striking and chemically darkened in the case of the 25 and 50 class, while in the 75 and 100 class the tank was silvered. The reverse has several variations, and could either have a slim or wide pin.[2] The 50 and 100 engagement badges were struck in a lightweight zinc alloy; this was so that the larger pin did not pull inconveniently on the tunic.[4] The 200 engagements badge was unofficially created and was never officially documented.[5] The Tank in the center of the medal is a Panzerkampfwagen III.[4] The 1957 de-Nazified version lost the Eagle and the Swastika, but was otherwise unchanged.[4]

Luftwaffe Panzer Battle Badge

On November 3, 1944 the head of the Luftwaffe, Reichsmarschall Hermann Göring, instituted the Luftwaffe Panzer Badge, to honor the panzer troops of the Luftwaffe Field Divisions.[6] Until this time qualified Luftwaffe personnel were awarded the Panzer Badge. The order called for two basic forms of the badge. The first style consisted of silver oak leaf wreath and Luftwaffe flying eagle with a black tank in the center. These badges were awarded to tank commanders, gunners, drivers, radiomen, repair crews and their medical personnel. The second style was identical to the first except the oak leaf wreath was now black. Panzergrenadiers, armored reconnaissance units, and the medical personnel attached to them were all eligible for this style.[6] The Luftwaffe Panzer Badge consists of an oval wreath composed of eight oak leaves on the left and, due to the tank protruding from the center, only seven oak leaves on the right. A ribbon is positioned on the base of the wreath and a Luftwaffe flying eagle is to be found at the top.[6] The badge was presented in a paper packet with the name of the award printed on the outside. The award document that was to be awarded with it was the common type featuring the recipients name, rank, unit, and the authorizing signature of an officer. The Luftwaffe Panzer Badge was worn on the left pocket of the tunic and (as with all badges) could be worn on civilian clothes in miniature stickpin form. Both badge styles were awarded for three combat engagements on three different days. As mentioned above the silver wreathed versions were awarded to panzer crews, repair crews, and the medical personnel attached to them, while the black wreathed version was awarded to panzer grenadiers, armored reconnaissance units, and their medical personnel.[6]


  1. Panzerkampfabzeichen - Panzer Badge
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 "Panzer Assault Badge". Sebastian Bianchi. Retrieved 20 April 2009. 
  3. Windrow, Martin (1982). The Panzer Divisions. Osprey Publishing. ISBN 0-85045-434-4. 
  4. 4.0 4.1 4.2 4.3 4.4 Williamson, Gordon (2002). World War II German Battle Insignia. Osprey Publishing. ISBN 1-84176-352-7. 
  5. "Uniforms and Insignia". George Parada. Retrieved 20 April 2009. 
  6. 6.0 6.1 6.2 6.3 "Luftwaffe Tank Battle Badge". Sebastian Bianchi. Retrieved 21 April 2009. 

This page uses Creative Commons Licensed content from Wikipedia (view authors).