Military Wiki

Question book-new

The factual accuracy of this article may be compromised due to out-of-date information

Mk 48 Mod 0
Mk 48 PEO Soldier
Mk 48 Mod 0
Type General-purpose machine gun
Place of origin
  • Belgium
  • United States
Service history
In service 2003–present
Used by United States Special Operations Command
Wars
Production history
Designer FN Herstal
Designed 2003
Manufacturer FN Herstal
Produced 2003–present
Variants Mk 48 Mod 1[1]
Specifications
Mass 8.2 kg (18.26 lb) empty
11.2 kg (24.7 lb) w/ 100 rounds
Length 1,000 mm (39.75 in)
Barrel length 502 mm (19.75 in)

Cartridge 7.62×51mm NATO (STANAG 2310)
Action Gas-operated, open bolt
Rate of fire 710 (± 50) rounds/min
Effective firing range 800 m (~875 yd), area target
Maximum firing range 3,600 m (~3,940 yd)
Feed system Disintegrating belt (M13 link)

The Mark 48, or Mk 48 is a lightweight belt-fed machine gun, firing 7.62×51mm NATO cartridges from a disintegrating belt of ammunition.

It is manufactured by Fabrique Nationale Manufacturing, Inc., a division of FN Herstal based in the United States. The Mk 48 has been developed in conjunction with the U.S. Special Operations Command (USSOCOM), which has adopted the weapon and started its fielding process, beginning with special operations units.

History[]

On 21 March 2001, the USSOCOM approved the MNS/ORD (Mission Need Statement/Operational Requirements Document) for a new 7.62×51mm NATO lightweight machine gun (LWMG) to replace the M60E4/Mk 43 Mod 0 in use by United States Naval Special Warfare Command (NSWC) units.

The LWMG program was patterned after the Mk 46 Mod 0—a variant of the M249 light machine gun currently in use by the USSOCOM.

Fabrique Nationale's division at Columbia, South Carolina (which also produces the M249 and M240 series of weapons for the U.S. military) was charged with production of the Mk 48 Mod 0. The program achieved full-rate production on 21 March 2003.

Design[]

Defense.gov News Photo 101104-A-7125B-053 - U.S. Army Spc. Joshua D. Heinbuch left and Spc. James M

Mk 48 Mod 0 in US Army service in Afghanistan, 2010.

The Mk 48 Mod 0 is a gas-operated, air-cooled, fully automatic belt-fed machine gun. The design is based on an early 7.62×51mm NATO prototype of the FN Minimi, modified to be a scaled-up version of the 5.56 mm Mk 46 Mod 0.

Being heavily based on the Mk 46 Mod 0, the Mk 48 Mod 0 features five MIL-STD-1913 Picatinny rails (one on top of the receiver, one on each side of the forearm/handguard, one under the handguard, and one on top of the barrel), an integral folding bipod, and a tripod-mounting lug. The weapon is fitted with the same fixed, polymer buttstock as the M249, although the metallic, collapsible buttstock from the "Para" model can be found in some models. The carrying handle, which had been removed from the Mk 46, was reintegrated on the Mk 48 to assist the replacement of hot barrels without use of other equipment, such as heat-resistant gloves; the handle can be folded down when not in use. As with the Mk 46, the Mk 48 Mod 0 does not have an M249-type magazine feed port, in order to save weight. The weapon can be fed from a loose belt, separate belt boxes, or clip-on ammunition pouches for 100 rounds.

There is a high degree of parts commonality between the Mk48, M249 and Mk46 machine guns, which simplifies maintenance and repair. The use of M1913 "Picatinny" rails allows the fitting of various accessories from the SOPMOD kit, such as the ECOS-N (Enhanced Combat Optical Sight) red dot sight and other sighting or target-designating devices. The Mk 48 can also be fitted with a vertical foregrip for increased controllability during sustained fire. While heavier than the 5.56×45mm NATO M249 due to its larger chambering and heavier barrel, the Mk 48 Mod 0 is still 17% lighter and 8.4% shorter than the M240.

The Mk 48 Mod 0 is currently in service with certain USSOCOM units, such as the U.S. Navy SEALs and Army Rangers.[2]

Variants[]

Airman firing Mk 48 near FOB Mehtar Lam

US Air Force Staff Sergeant with the Mk 48 Mod 1 in Afghanistan, 2011.

Mk 48 Mod 0
This is a 7.62×51mm NATO version of the Mk 46, used by USSOCOM when a heavier cartridge is required.[3] It is officially classified as an LWMG (light weight machine gun) and was developed as a replacement for the Mk 43 Mod 0/1. The M60-based machine guns are a great deal more portable than the heavier M240-based designs used elsewhere in the U.S. military in the infantry medium machine gun role. The M60-based designs have a long history of insufficient reliability, however. Trials conducted through the mid-1990s led the U.S. Army to replace its M60 with M240B GPMGs. The M240B weighs in at ~27.5 lb and is about 49 inches long with the standard barrel. Due to this extra weight and size NAVSPECWAR was reluctant to give up the increased portability of the M60 (~22.5 lb, 37.7 inches OAL with the shortest "Assault Barrel") designs, despite the M240's increased reliability. A request was put in for a new machine gun in 2001, and FN responded with a scaled-up version of the M249 weighing in at ~18.5 lb with an OAL of ~39.5". This new design achieved much better reliability than the M60-based weapons while bettering its light weight and maintaining the same manual of arms as the already in-use M249. USSOCOM was slated to begin receiving deliveries of the new gun in August 2003.[4]
Mk 48 Mod 1
The Mk 48 Mod 1 is an update of the Mk 48 Mod 0. Like the Mod 0, it is essentially an M249 scaled up to fire the 7.62×51mm NATO round. The Mod 1 utilizes a 19.75-inch barrel, weighs in at 18.37 lb unloaded, and has a rate of fire of 500–625 rpm. Major changes include the use of an adjustable buttstock, modified rail interface system, removal of the original hinged heat guard in favor of M249-style ones attached to the barrel, and modified bipod mount.[5]

See also[]

References[]

External links[]


All or a portion of this article consists of text from Wikipedia, and is therefore Creative Commons Licensed under GFDL.
The original article can be found at Mk 48 machine gun and the edit history here.