Military Wiki

German K98K version of the 98 Mauser

Industry Defence industry
Genre Firearms
Predecessor(s) Königlich Württembergische Gewehrfabrik
Successor(s) Mauser Jagdwaffen GmbH, Rheinmetall
Founded May 23, 1874 (1874-05-23)
Founder(s) Wilhelm & Paul Mauser
Defunct 1995 (sold to Rheinmetall), 2004 (Mauser-Werke Oberndorf Waffensysteme GmbH merged to Rheinmetall)
Headquarters Oberndorf am Neckar, Germany
Area served Europe
Key people Mauser brothers
Products Firearms
Services Military and public firearms
Owner(s) Rheinmetal

Mauser was a German arms manufacturer of a line of bolt action rifles and semi-automatic pistols from the 1870s to 1995. Mauser designs were built for the German armed forces. Since the late 19th and early 20th centuries, military Mauser designs were also exported and licensed to a number of countries, as well as being a popular civilian firearm.

Mauser continued to make sporting and hunting rifles in the late 20th century. In 1995 the company became a subsidiary of Rheinmetall called Mauser-Werke Oberndorf Waffensysteme GmbH, before being merged in 2004 into Rheinmetall Waffe Munition Gmbh.

A division of the original company, Mauser Jagdwaffen GmbH, was split off and, in 2000, merged with SIGARMS; eventually becoming a subsidiary of SIG SAUER. Mauser Jagdwaffen continues making rifles. The Mauser name has historically also been licenced by other companies on intermittent occasions.


Bob===Early years=== Peter Paul Mauser, often referred to as Paul Mauser, was born on 27 June 1838, in Oberndorf am Neckar, Württemberg. His brother Wilhelm was four years older. Their father, Franz Andreas Mauser, was a gunsmith at the Württemberg Royal Armory. The factory was built in an Augustine cloister, a stout building ideal for arms production.[1] Another son, Franz Mauser, travelled to America in 1853 with his sister and worked at E. Remington & Sons.[2] Peter Paul was conscripted in 1859 as an artilleryman at the Ludwigsburg arsenal, where he worked as a gunsmith. Based on the Dreyse needle gun (Zündnadelgewehr), he developed a rifle with a turn-bolt mechanism that cocked the gun as it was manipulated by the user. The rifle initially used a firing needle; a later version used a firing pin and a rear-ignition cartridge.[3] The rifle was shown to the Austrian War Ministry by Samuel Norris of E. Remington & Sons. Norris believed the design could be adapted to convert Chassepot needle guns to fire metallic cartridges. Shortly thereafter, a partnership was formed in Oberndorf between Norris and the Mauser brothers.[4] The partners went to Liège in 1867, but when the French government showed no interest in a Chassepot conversion, the partnership was dissolved. Paul Mauser returned to Oberndorf in December 1869, and Wilhelm arrived in April 1870.[5]

Peter Paul and Wilhelm Mauser continued development of their new rifle in Paul's father-in-law's home.[5] The Mauser rifle was accepted by the Prussian government on 2 December 1871, and was accepted for service until 14 February 1872, after a requested design change to the safety lock.[5] The Mauser brothers received an order for 3,000 rifle sights, but actual production of the rifle was given to government arsenals and large firms. The sights were produced at the Xaver Jauch house starting 1 May 1872. After an order for 100,000 rifle sights was received from the Bavarian Rifle Factory at Amberg, the Mauser brothers began negotiations to purchase the Württemberg Royal Armoury. A delay in the purchase forced them to buy real estate overlooking the Neckar River Valley, where the Upper Works was built that same year. A house in Oberndorf was also rented to fulfill the Bavarian order.[5]

Acquisition of the Königlich Württembergische Gewehrfabrik

The Königlich Württembergische Gewehrfabrik was acquired on May 23, 1874, after an agreement between the Württemberg government and the Mausers to produce 100,000 Model 71 rifles. The partnership of Mauser Brothers and Company was formed between the Württemberg Vereinsbank of Stuttgart and Paul and Wilhelm Mauser on February 5, 1874. By 23 May 1874, the Mauser partnership had three factories in Oberndorf.[6]

Wilhelm Mauser suffered from health problems throughout his life, which were aggravated by his frequent business travels. A combination of these led to his death on 13 January 1882.[7] The partnership became a stock company with the name of Waffenfabrik Mauser on 1 April 1884.[8] The shares held by the Württemberg Vereinsbank and Paul Mauser were sold to Ludwig Löwe & Company on 28 December 1887, and Paul Mauser stayed as the technical leader.[8] Ludwig Löwe & Company was fifty per cent owner of Fabrique Nationale d'Armes de Guerre, a company formed in 1889 to manufacture Mauser rifles for the Belgian government.[8] Deutsche Waffen und Munitionsfabriken A.G. (DWM) was formed on 7 November 1896, as a merger of Ludwig Löwe & Company A.G., Deutsche Metallpatronenfabrik A.G., Rheinisch-Westfälischen Powder Company, and Rottweil-Hamburg Powder Company.[9] Mauser A.G. was formed on 23 April 1897. After World War II, DWM was renamed Industrie-Werke Karlsruhe A.G. (IWK).[9]

After 1940

In 1940 the Mauser Company was invited to take part in a competition to re-equip the German Army with a semi-automatic rifle, the Gewehr 41. A number of impractical requirements were specified, including that the design should not use holes drilled into the barrel to take off gas for the operating mechanism, thereby requiring mechanisms that proved unreliable. Two designs were submitted, and the Mauser version, the G 41(M), failed miserably in testing. It was canceled after a short production run. The resulting design did not see real success before it was switched to a simpler gas-operated system in the Gewehr 43. During World War II, the Mauser factory in Oberndorf was strategically bombed by the Allies, resulting in the deaths of 26 workers and the destruction of the company's power plant. French forces entered Oberndorf (which they subsequently occupied for some time) on 20 April 1945 when the town's mayor and planning committee surrendered without any resistance; no blood was shed there on that day.

Mauser K98K Stripper clip with 8x57mm rounds.

After the war in Europe, the factory was briefly put back in order to produce weapons for the now under-equipped and exhausted French military. The plant was dismantled by the occupying forces for the purpose of war reparations, most factory buildings (approximately 60% in total) were demolished and the records destroyed on orders of the local French Army commander. For a number of years, Mauser Werke manufactured precision measurement instruments and tools, such as micrometers. Edmund Heckler, Theodor Koch, and Alex Seidel, former Mauser engineers, saved what they could and founded Heckler & Koch, which has since become Germany's main small-arms manufacturer. Mauser continued to make hunting and sporting rifles. In 1994, it became a subsidiary of Rheinmetall, a manufacturer of autocannons such as the Mauser BK-27 and other munitions until 2004, when it was merged into Rheinmetall Waffe Munition Gmbh. In 1999 the civilian manufacture of hunting, defense, and sporting rifles were split off from Rheinmetall.

Civilian market

Mausers were readily adapted as hunting rifles; in Africa, Safari rifles were often made from Mausers. These rifles were often rechambered in larger rounds up to and including .50 caliber (12.7 mm). The adaptations usually consisted of shortening the foregrip and barrel, rechambering to accommodate popular British rounds, and minor alterations to the action. In the late 19th century and early 20th century, companies that made alterations were generally Commonwealth-based. Several proprietary big game rounds were specifically for hunting large and dangerous game. Today, large and small bore Mauser-derived rifles are made all over the world for the civilian market and are popular with hunters.

Surplus military Mausers, many in mint condition, have also entered the civilian market, to be purchased by collectors and gun owners. A considerable number of surplus Karabiner 98ks were available after World War II, and some were used by Schultz & Larsen in Denmark as the basis for target rifles. Some of these are still in competitive use, although with the benefit of new barrels.

The strong following enjoyed by surplus military Mausers is partly a testament to their reliability and quality of manufacture. Additionally, the widespread availability and comparative low cost of surplus military ammunition has served to continue their use by shooting enthusiasts. That being said, vintage surplus ammunition usually requires specialized cleaning regimens to prevent aggressive and rapid metal oxidation caused by corrosive salts (moisture attracting) contained in their priming compounds. Care must be taken to thoroughly and promptly clean and neutralize these salts after firing corrosive ammunition, lest the weapon suffer metal and mechanical damage.

In India and South Asia, few people are aware that "Mauser" is actually a brand name. The first Western-made handguns introduced into India were made by the Mauser company, and the term has entered the lexicon to mean any heavy pistol.


  • John Rigby & Company developed four distinct rounds for its Mauser Safari big-game rifles (.275 Rigby, .350 Rigby, .416 Rigby, and the .450 Rigby).
  • Česká Zbrojovka manufactures various Mauser 98 variants, the most notable being the CZ 550 Safari Magnum, the .375 H&H Magnum, and the .458 Lott.
  • SIG Sauer makes a Mauser M98 rifle chambered in several medium and magnum chamberings and a M98 Safari rifle, chambered in .416 Rigby, .450 Dakota, .458 Lott, and .500 Jeffry.
  • Zastava Arms manufactures several 98 Mauser variants, the best known of these being the LK M70 and M85 series, in various popular calibers ranging from .22–250 to .458 Winchester Magnum. A number of the LK M70 slightly modified versions have been widely sold in other countries.
  • Carl Gustav Sweden national armory took over the manufacturing of the M94/96 and the famous target rifles CG63 and CG68.
  • Husqvarna Vapenfabrik made M94-96, variant M38, M38-96, and many other civilian variations; Model 46 (46A,46B, and 46AN) in cal. 6.5X55, 9.3X57 and 9.3X62; Model 640 (646 – 6.5X55, 648 – 8X57IS, 649 – 9.3X62) without the thumb notch. They used FN action for later models 640 and 140 series. The cross-over model 1640 Improved Mauser (over the M96) is a cross between the M98 and M96. They also produced the 1900 actions.
  • Fabrique Nationale de Herstal made a M98 series, the early production being Small Ring and later Large Ring of "C" (early) and "H" (late) design. The FN actions were also used by Sako of Finland as their Hi-Power Rifles, by Browning on the early Medallions, as Husqvarna Small Ring model 146 and Large Ring late model 640, and by Kodiak Arms, Connecticut. Many other arms manufacturers used the FN action.

Mauser firearms pre-1945


Mauser-Norris Model 67/69 Rifle

Between 1867 and 1869, the Mauser brothers and Samuel Norris developed a single shot bolt-action rifle. The caliber and number produced are not known. Ludwig Olson wrote that an example had at one time been on display at the Smithsonian Institution in Washington, D.C.[10] The rifle was patented in Austria by Samuel Norris on 24 December 1867. The bolt head did not rotate, a feature chosen by Paul Mauser to "protect the heads of paper cartridges from friction and possible damage while locking the bolt, and to provide a non-rotary seat for the extractor when metallic cartridges were used."[10]

An improved version of the rifle used a coil spring wrapped around the firing pin and a safety and a cocking piece attached to the rear of the firing pin.[10][11] This rifle was shown to the Prussian government, and after some design changes to the safety, was accepted for service as the Infantry Rifle Model 71 on 14 February 1872.[10] Often considered a close relative of the Chassepot rifle, and borrowing Dreyse's turning-bolt action lock, still the most innovative features of the new weapon were the work of Peter Paul Mauser.[12]

Model 1871 and derivatives

The Mauser Model 1871 was the Mauser brothers' first rifle. It was adopted by the German Empire (except for the Kingdom of Bavaria) as the Gewehr 71 or Infanterie-Gewehr 71 (I.G.Mod.71 was engraved on the rifles). Production began at the Oberndorf factory for the infantry version, which fired a black powder 11×60mm round from a long 850mm barrel. Shorter versions were introduced with the 700mm barreled jäger and 500mm cavalry carbine.

Slightly modified versions were widely sold to other countries, firing bullets that would today be considered very large, typically 9.5mm to 11.5mm. Such large bullets were necessary due to the limitations of black powder, which limited velocities. Serbia designed an improved version of the Model 71 in 10.15mm, made in Germany and called the Mauser-Milovanovic M1878/80. In 1884 an 8-shot tubular magazine was added by Mauser to the Model 71/84. The Turkish model 1887 rifle was the first of a series of rifles produced for the Turkish Army. Its design echoed that of the German Gewehr 71/84 service rifle: a bolt-action weapon with a tubular magazine beneath the barrel. The Turkish contract specified that if any other nation ordered Mauser rifles with more advanced technology, that design would be substituted for the Model 1887 to fill the remainder of the Turkish order. This clause was utilized after Belgium adopted the Model 1889 rifle.

8×57mm I and IS or JS cartridge

In 1886 the French Army introduced the Lebel Model 1886 rifle, which used a smokeless powder cartridge. Smokeless powder allowed smaller diameter bullets to be propelled at higher velocities, with accuracy to 1,000 yards (910 m), making most other military rifles obsolete. Its disadvantage was a slow-to-load 8-round tube magazine.

The German Army adopted the best features of the Lebel for the Gewehr 88, also known as the Model 1888 Commission Rifle, along with a modified Mauser action and a Mannlicher-style box magazine. The Karabiner 88 was the carbine version. Both would be updated in the early 20th century and saw limited use in World War I. The Gewehr 88 was not actually a Mauser designed and engineered rifle.

The Gewehr 88 was built for the new 8×57mm I with a 0.318-inch bullet. The I and IS designations are used to differentiate the two bullets used with the same basic cartridge. The actual diameter of the 8.1mm is 0.318898 inches. Commonly known today as the "8 mm Mauser I", it was used for later Mauser rifle models. This was not a Mauser designed and engineered cartridge. The 8×57mm I incorporated the advantages of smokeless powder and higher velocity found in the Lebel. It was rimless, which allowed smoother feeding for both rifles and machine guns. The original bullet had a round nose and was relatively heavy by modern standards but was typical of early smokeless powder small bore military designs. Several redesigns, including the adoption of the spitzer bullet of 196 grains weight, led to a change in the rifling groove depth from .10mm to .15mm to solve problems brought about by the greater velocity and the 8×57mm IS or 8×57mm JS 8.2mm or 0.323-inch bullet. This bullet, with a sharp point and boat tail, brought the cartridge to its eventual potency. Only later .323 caliber versions of Gewehr 98 or converted Gewehr 88 and Gewehr 98 rifles could safely fire the larger 8x57mm JS rounds.

The Mauser 8×57mm JS or JSR (8.2mm or 0.323-inch) cartridge should not be fired out of a rifle designed for 8×57mm I (8.1mm or 0.318-inch). The increased pressure from the larger cartridge may cause a catastrophic failure of the firearm. A qualified gunsmith can verify the correct chambering by slugging the barrel. The mark and caliber applied by the proofing house may also be utilized to properly identify the correct caliber of the rifle.

The R included in this style of designations indicates a cartridge with a rim, which functions better in some types of rifles, especially drillings and other types of combination guns. These often have slightly lower power to match the weaker actions present in some of these rifles. Many such guns continued to use the smaller 0.318 diameter bullet until this practice was outlawed by Hermann Göring in the early 1940s in his role as chief huntsman of the Third Reich. Particular care should be taken to determine the actual caliber of such guns before firing them.

Models 1889/90/91 and Experimental Model 92

Mauser Experimental Model 92 in caliber 8x58R. This rifle took part in the rifle trials that led to the Swedish Mauser.

After the Mauser brothers finished work on the Model 71/84 in 1880, the design team set out to create a small caliber repeater that used smokeless powder. Because of setbacks brought on by Wilhelm Mauser's death, they failed to have the design completed by 1882, and the German Rifle Test Commission (Gewehr-Prüfungskommission) was formed. The commission preferred to create their own design. Paul Mauser created two different variations of the same rifle, one with a stock strengthened with a barrel shroud and a traditional design following the layout of the 71 series in hope he might be able to overturn the commission's decision, or at least sell his design to the Kingdom of Bavaria, which adopted its own arms. The two rifles became known as the 89 Belgian (with a barrel shroud) and the 91 Argentine (with a 71 layout) Mausers, identical in their function and feed system. The main features were the ability to use stripper clips to feed the magazine (a revolution in rate of fire), and its rimless cartridge (7.65 Argentine), advanced for the time.

The system proved impressive at the 1884 Bavarian Arms Trials. Both firearms were a success, but decision-makers were not convinced that the stripper feed was superior to the en-block system employed by Mannlicher. In response, Mauser started small-scale production of the design in an effort to interest foreign nations, but failed to convince any of the European major powers.

The Belgian attache, however, urged his government to contact Mauser, hoping the design might give them a chance to found a domestic arms industry. The heavy-barreled Mauser with the barrel shroud resulted in the founding of arms manufacturer FN Herstal. FN could not keep up with orders, so they outsourced production to the Birmingham Small Arms Company in England.

The Belgians talks with Mauser prompted the Ottoman Empire to consider the design. In the end they ordered their own simpler variation of the 91 Argentine Mauser known as the 90 Turkish. While this was taking place, the Argentine Small Arms Commission contacted Mauser in 1886 to replace their Model 71s; since they wished to keep retraining of their armed forces to a minimum, they went for the Mauser 91. As with other early Mausers, most such arms were made by the Ludwig Loewe company, who in 1896 joined with other manufactures to form Deutsche Waffen und Munitionsfabriken.

All variations used the same 7.65 mm round-nosed cartridge. Many parts were interchangeable, with the exception of the bayonets of the 89 and 90/91; the barrel shroud made the bayonet ring too wide. The 89 Mauser rejected by Germany in 1884 entered service in 1940 with the second-line units of Norway, Denmark, the Netherlands, and Belgium.

A non-rotating Mauser claw extractor was introduced in the Model 92. Several variations of this model participated in rifle trials for the U.S. Army of that year; the Krag-Jørgensen rifle was ultimately chosen.

Spanish M93

The Spanish Model M1893 is commonly referred to as the "Spanish Mauser", though the model was adopted by other countries in other calibers, most notably the Ottoman Empire. The M93 introduced a short staggered-column box magazine as standard, holding five smokeless 7×57mm Mauser rounds flush with the bottom of the rifle, which could be reloaded quickly by pushing a strip of rounds from the top of the open bolt. It still had only two locking lugs.

The new 7×57mm round, which used a 173 gr (11.2 g) full metal jacket bullet developing 700 m/s (2,300 ft/s) from a 29 inches (74 cm) barrel, became the standard infantry arm for the Spanish armed forces, as well as for the military of several Latin-American nations. It is known as the "7mm Mauser".

1895 DWM Argentine Mauser 7x57 mm

1893-95 Mauser rear sights

The 1893 Mauser was used by the Spanish Army in Cuba against U.S. and Cuban insurrectionist forces. It gained a deadly reputation particularly from the legendary Battle of San Juan Hill (1898), where only 750 Spanish regulars significantly delayed (but not halted) the advance of 15,000 U.S. troops armed with a mix of outclassed .30-40 Krag-Jørgensen bolt-action rifles and older single-shot, breech-loading Trapdoor Springfield rifles, inflicting 1,400 U.S. casualties in a matter of minutes. The Mauser's 7mm cartridge gave some 300 ft/s (91 m/s) higher velocity and a resultant flatter trajectory over the .30 Army cartridge used in the U.S. Krag-Jørgensen rifle. This extended the effective range of Spanish defensive fire. The use of smokeless powder gave the Spanish a major advantage over the single-shot, black powder Springfield that was issued to many U.S. troops.[13] The M93's stripper clip system allowed the Spaniards to reload far more quickly than could be done with the Krag, whose magazine had to be loaded one round at a time.[13] A U.S. Army board of investigation was commissioned as a direct result of this battle. They recommended replacement of the Krag. By 1903, U.S. authorities had adopted the M1903 Springfield, which copied the 1898 Mauser's bolt and magazine systems, along with a higher-velocity .30 caliber cartridge, the .30-03 (later the more potent .30-06 Springfield).

The 1893 Mauser was also used by the Spanish Army in the Philippines against the Philippine Revolutionary Army and U.S. forces.The main weapon of the new Filipino army was the Spanish M93, also the standard infantry arm of the Spanish, and the Remington Spanish rifle.[14] During the 1899 Battle of Paye, U.S. Army Major-General Henry Ware Lawton known for leading the expedition that captured Geronimo, was in the midst of the fighting. A team of elite Filipino sharpshooters known as the "Tiradores del Muerte" ("Marksmen of Death") using Spanish M93 rifles set up position 300 yards (270 m) away, ironically under the command of a general named Licerio Gerónimo. Having shrugged off cautionary warnings from his officers, Lawton walked up and down the line, rallying his men. Marcelo Bonifacio a Filipino sharpshooter shot Lawton and killed him instantly. He was the highest ranking American officer to fall in battle in either the Spanish-American or Philippine-American wars.

Ottoman variant

When the Ottoman Army learned about the new Spanish Model of 1893, it ordered some 200,000 rifles in the same configuration. Their rifles were chambered for the 7.65×53mm Argentine cartridge and were identical to the Spanish model, except for a unique cartridge feed interruptor or magazine cutoff, which permitted the feeding of single cartridges while keeping the magazine fully loaded. What distinguished the original 1893 Ottoman Mauser was its tangent rear sight calibrated from 200 to 2,000 meters, which was represented not by Arabic numerals like almost all other rifles, but instead by Eastern Arabic numerals; these numerals would also be used on future Persian Mauser rifles and carbines. Later (and most manufactured throughout the decades of production) Turkish Mauser rifles produced were fitted with rear sights calibrated in standard Arabic numerals. By the 1930s, most all of these original rifles still in Turkish hands were re-barreled and converted to fire the far more common and powerful 8mm Mauser. Even so, this remains a distinguishing feature of the few authentic 1893 Ottoman Mauser rifles–the ones still chambered in 7.65mm Argentine–still in existence from that period.

Spanish M1916 rifle

The M1916 rifle was introduced in 1916. It was a shortened version of the M1893 rifle with a straight stock chambered in 7mm Mauser. Some were later re-barreled to use the 7.62×51mm NATO round. Many were also converted into FR7 rifles for military training and Guardia Civil use.

There is a common misconception that Spanish 1916 Mausers were chambered for 7.62×51mm CETME, a common round in use by the Spanish military; however, the M1916 was actually chambered for 7.62mm NATO.[15]

Model 1894 and Model 1895

Swedish carbine Model 1894

The armies of Brazil and Sweden were issued the Model 94. The similar Model 1895 was sold to Mexico, Chile, Uruguay, China, Persia, and the South African states of Transvaal and the Orange Free State (Boers). A safety feature offered by the Model 1895 was a low shoulder at the rear of the receiver, just behind the base of the bolt handle, which would contain the bolt in the unlikely event that the front locking lugs sheared off due to excessive pressure. South African Mausers were highly effective against the British during the Second Boer War;[16] these proved deadly at long ranges, prompting the British to design their own Mauser-inspired high-velocity cartridge and rifle. These rare Mauser carbines and rifles—especially the Model 1895—can be easily identified by the letters "OVS" (Oranje-Vrijstaat [Dutch for "Orange Free State"]) either marked on the weapons' receiver ring and the stock directly below, or otherwise carved into the right side of the buttstock. The British Pattern 1914 Enfield with a Mauser-style lug might have replaced the Lee-Enfield, but the exigencies of World War I prevented this from happening. The Lee-Enfield continued to see service until it was replaced by a semi-automatic weapon after World War II. The Germans had faced the U.S. M1917 rifle during World War I, which was the Pattern 14 rifle adapted to fire the U.S. .30-06 cartridge of the American M1903 Springfield rifle.

Model 1896

Swedish rifle Model 1896

On 3 November 1893, the United Kingdoms of Sweden and Norway adopted the 6.5×55 mm cartridge. As a result, the Swedes chambered their new service weapons, the m/94 carbine and m/96 rifle, in this round. The rifle action was manufactured relatively unchanged from 1896 to 1944, and the m/94 Carbine, m/96 Rifle, m/38 Short Rifle, and m/41 Sharpshooter models are known by collectors as "Swedish Mausers". They are still sought after by military service rifle shooters and hunters. Initial production of the weapons was in Germany by Waffenfabrik Mauser, with the remainder being manufactured under license by Sweden's state-operated Bofors Carl Gustaf factory. The m/38 short rifle was produced by Husqvarna; additional m/38s were converted from Model 96 rifles.

"Swedish Steel" is a term for the steel used by the German Mauser, and later by Swedish manufacturing facilities, to make the m/96 rifles. Swedish iron ore contains the proper percentages of trace elements to make good alloy steel. Thus, though lacking the industrial base necessary for mass-producing steel and iron, the Swedish steel industry developed a niche market for specialty high-strength steel alloys containing nickel, copper, and vanadium. Swedish steels were noted for their strength and corrosion resistance and were especially suited for use in toolmaking, cutlery, and firearms. When Mauser was contracted to fabricate the initial production runs of Swedish Mausers in Germany due to production delays, Sweden required the use of Swedish steel in the manufacturing process. The Swedish Ordnance Office continued to specify the same Swedish steel alloy in Swedish-made Mausers until the last new-production m/38 barrelled actions were completed in 1944.

Model 1898

Mauser Model 98

File:LA2-Blitz-0150 Infanteriegewehr M98 side.jpg

Mauser M 98 controlled-feed bolt-action system. a = chamber, b = front main locking lugs recess, c = receiver, d = internal magazine spring, e = ammunition stripper clip, f = bolt group, g = firing pin, h = pistol grip

In 1898 the German Army purchased a Mauser design, the Model 98, which incorporated improvements introduced in earlier models. The weapon officially entered German service as the Gew. 98 on April 5, 1898. This remains by far the most successful of the Mauser designs, helped by the onset of two World Wars that demanded vast numbers of rifles.

Noticeable changes from previous Mauser rifle models included better ruptured case gas venting, better receiver metallurgy, and larger receiver ring dimensions for handling the pressures of the 8x57 cartridge. Mauser incorporated a third "safety" lug on the bolt body to protect the shooter in the event that one or more of the forward locking lugs failed. In 1905 the "spitzer" (pointed) round was introduced. This was in response to the French adoption of a pointed and boat-tail bullet, which offered better ballistic performance. The bullet diameter was increased from 0.318 inches (8.1 mm) to 0.323 inches (8.2 mm). This improved round copied the pointed tip design instead of the previous rounded nose profile. Pointed rounds give bullets a better ballistic coefficient, improving the effective range of the cartridge by decreasing aerodynamic drag.

Most existing Model 98s and many Model 88s were modified to take the new round, designated "8x57 IS". Modified Model 88s can be identified by an "S" on the receiver. Due to the possibility for overpressure from the undersize barrel, the spitzer round should never be used in unmodified guns. Even then, caution should be exercised, particularly with Model 88 rifles, where the modification was long-throating the existing barrels.

Paul Mauser died on 29 May1914, before the start of World War I that August. The war caused a spike in demand for the company's rifles. The 98 carbines were sold, as well as an experimental version with a twenty round, rather than five round, box magazine. The extended magazine was not well received, however.

A number of carbine versions known as Karabiner 98s were introduced and used in World War I. Some of these were even shorter than the later K.98k. These carbines were originally only distributed to cavalry troops, but later in the war to the special storm troop units as well.

G98 derivatives

Many military rifles derive from the M98 design. Some of these were German-made by various contractors other than Mauser, including the M1910 Serbian in 7x57mm, M1902 Mexican in 7x57mm, M1903 Turkish in 7.65x53mm, M1909 Argentine in 7.65x53mm, Steyr M1912 Chilean in 7x57mm, M1908 Brazilian in 7x57mm, and numerous others.

The Mauser 1918 T-Gewehr was the world's first anti-tank rifle—the first rifle designed for the sole purpose of destroying armored targets. The weapon, essentially an enlarged G98, fired 13x92mm (.525-caliber) TuF (Tank und Flieger, "tanks and aeroplanes") semi-rimmed cartridges. In May 1918 the Mauser Company began mass-producing the Mauser 13 mm Tank Abwehr Gewehr Mod. 18 in Oberndorf am Neckar.

Following the collapse of the German Empire after World War I, many countries that were using Mauser models chose to develop, assemble, or modify their own G98-action rifle designs. The most prolific of them were the Czechoslovakian M1922 CZ 98 and M1924 CZ vz.24 and the Belgian Fabrique Nationale M1924 and M1930, all in 8x57mm.

The Belgians and Czechs produced and widely exported their "Mausers" in various calibers throughout the 1920s and 1930s, before their production facilities were absorbed by Nazi Germany to make parts or whole rifles for the German Army. Strictly speaking, these were not "Mauser" rifles, as they were not engineered or produced by the German company.

To take advantage of the widespread and popular German single-shot 8.15x46R cartridge for use in a military firearm, a modified Gewehr 98 referred to as a "Wehrmannsgewehr" was designed. These were made primarily as single shots; some only had a wood block in the magazine space. These became the 1936 Olympic team rifles for the Germans.

As the restrictions on production were increasingly ignored by the Germans in the 1930s, a new Mauser, the Mauser Standard Model, was developed from the rifle-length Karabiner 98b. It was nominally intended for export and civilian sales. While many Standard Model rifles were indeed exported, it was meant primarily for use by the revived German military. It rapidly evolved into the Karabiner 98 Kurz, which was adopted by Nazi Germany as the standard infantry rifle in 1935 and saw service until the end of World War II.

Type A, Model B, Model K, Armee-Model C, Africa Model

A series of very successful hunting rifles were developed in the first decades of the 20th century. The Special Rifle Type A was the top-of-the-line sporting rifle of the early 20th century. The Model B (B for Büchse) and Model K were sport rifles offered in many configurations. The Model C, made from 1903 to 1930, was a cheap rifle made to accommodate a range of cartridges for hunting. The Mauser Africa Model, introduced around 1904 or 1905, was used mainly by settlers in Africa.

Model M and model S

The Model M was introduced in 1914. A Model S (S for Stutzen or short) was also offered.

Mauser 1925 Special Range Rifle

The 1925 Special Range Rifle was a commercial product introduced in 1925 and sold in the United States. It was intended for high accuracy range shooting. The company also produced a .22 caliber training rifle during this time frame.

Karabiner 98k

File:Karabiner 98k.jpg

Mauser Karabiner 98k

The Karabiner 98k "Mauser" (often abbreviated "K98k" or "Kar98k"), adopted in the mid- 1930s, became the most common infantry rifle in service in the German Army during World War II. The design was developed from the Karabiner 98b, one of the carbines developed from the Model 1898. The K98k was first adopted by the Wehrmacht in 1935 as their standard issue rifle, with many older versions being converted and shortened.

Mauser Selbstlader

The Mauser Selbstlader (self-loader), or Mauser M1916, was a semi-automatic rifle that used a delayed blowback mechanism. (The process of developing a semi-automatic rifle cost Paul Mauser an eye when a prototype suffered an out-of-battery detonation.) The mechanism was quite delicate, working reliably only when completely clean, which made the rifle unsuitable for infantry use. However, the Imperial German Air Service (GIAS) adopted the rifle for its airship service in 1915, and more generally in 1916. The GIAS could provide the clean environment the rifle required, and the semi-automatic functioning was an advance over bolt-action rifles. However, the rifle had another flaw; it was expensive to make. The GIAS turned to the Swiss-produced Mondragon rifle, which was already in use with the army and though less accurate than the Mauser Selbstlader, much cheaper. The widespread adoption of machine guns then made all self-loading rifles obsolete in the air service role.


C1896 Pistol

Mauser branched out into pistol design in 1896, producing the C96, commonly known as "Broomhandle," designed by the three brothers Fidel, Friedrich, and Josef Feederle[17] (often erroneously spelled "Federle"). All versions used detachable shoulder stock holsters. Over a million C96s were produced between 1896 and the late 1930s.

Mauser 1910 and 1914 Pocket Pistols

Mauser factory, 1910

The 1910 was a small self-loading pistol chambered for .25 ACP (6.35 mm). It was introduced in 1910; an updated model chambered for .32 ACP (7.65 mm) came out in 1914. Model 1934 is virtually identical to the 1914 except for the grip, which had a more curved back. Most of these were used by the Wehrmacht and the Kriegsmarine. They were also sold commercially.

Mauser Model 1934 Pocket Pistol

left: 7.65mm 1934 Model Pocket pistol, right: Browning 9mm (for comparison)

This was a small pocket pistol chambered for .32 ACP (7.65mm) based on the earlier Model 1910/34. It was used by the Kriegsmarine and was also sold commercially.

Mauser HSc

The Mauser HSc was a self-loading handgun introduced in the 1940s. It was a compact double action blowback design in .32 ACP. Production ran from 1940 until the end of World War II, and in the 1960s and early 1970s. The post-war models were also available in .380 ACP.

Mauser firearms after the Second World War

Mauser was formally re-established in the 1950s.


A rifle design by Walter Gehmann was purchased, and went into production in 1965 as the model 66. Some self-loading pistols were also offered, such as the Mauser HSc.

  • Model 66
  • Model 66 S
  • Model 66 P


Mauser SP66 sniper rifle.

  • Model 77
  • Model 86
  • Mauser SP66 – a sniper rifle based on the Model 66. A further upgraded model was the Mauser 86 SR.
  • Mauser Parabellum


In the 1990s Mauser was bought by Rheinmetall Berlin AG; the sale was completed in 1996. Rheinmetall Berlin AG was renamed Rheinmetall AG that same year. In 1999 the firearms maker was split off from the Rheinmetall. The Mauser name was divided between the traditional civilian rifle company and a division of Rheinmetall.

  • Mauser SR 93 sniper rifle
  • Model 94
  • Model 96 / model 96 S – a straight pull action rifle
  • Mauser SR 97

In 2004 Mauser-Werke Oberndorf Waffensysteme GmbH was incorporated into Rheinmetall Waffe Munition GmbH, along with several other companies.

Mauser heritage

Mauser Security

In 2002 the great grandson of Mauser, Maximilian Wilhelm Paul Mauser, created and developed a manufacturing and retail security company in Brazil named Mauser Security Technologies where he continued the creativity and focus of their ancestors.


Pre-World War II
20 mm FlaK 30/38 cannon
20 mm MG FF cannon
20 mm MG 151 cannon
20 mm MG 213 cannon
30 mm MK 108 cannon
Post-World War II
27 mm BK-27 cannon
30 mm RMK30 cannon

See also


  1. Smith 1990, pp. 12–13.
  2. Olson 1976, pp. 1–3.
  3. Olson 1976, p. 3.
  4. Olson 1976, p. 4.
  5. 5.0 5.1 5.2 5.3 Olson 1976, p. 5.
  6. Olson 1976, pp. 5–7.
  7. Smith 1990, p. 14.
  8. 8.0 8.1 8.2 Olson 1976, p. 9.
  9. 9.0 9.1 Olson 1976, p. 10.
  10. 10.0 10.1 10.2 10.3 Olson 1976, p. 22.
  11. Smith 1990, pp. 54–55.
  12. Smith 1990, p. 17.
  13. 13.0 13.1 Sams 1898.
  14. "Philippine-American War, 1899-1902". Retrieved 2012-01-28. 
  15. Folleto descriptivo del Mosquetón Mauser 7,62, trasformado de 7 mm. Madrid: Jefatura de Armamento. 1969. 
  16. Venola 2010.


External links

Video links


This page uses Creative Commons Licensed content from Wikipedia (view authors).