The M829 is an American Armor-Piercing, Fin-Stabilized, Discarding Sabot (APFSDS) tank round designed specifically for the 120 mm M256 main gun on the M1A1 and M1A2 main battle tanks. This sub-caliber anti-tank round is essentially a dart made of a depleted uranium (DU) alloy which gives it good performance against nearly all known types of tank armor. The penetrator is held in place by the sabot during the acceleration in the gun barrel.
History[]
 |
This section is empty. You can help by adding to it. |
Design[]
The penetrator is made of depleted uranium alloys which offer good performance against tank armor, except the newest generations of explosive reactive armor (ERA).
Variants[]
M829[]
The M829 has a ballistic cap and five tail fins made of aluminum; it also has a long carbon fiber sabot. The sabot holds the sub-caliber round in place in the barrel and breaks off into five "petals" as the round leaves the gun tube. The propulsion system uses an obturating case base with a semi-combustible wall. It has a total weight of 41.1 lb (18.6 kg) and utilizes a 615 mm (24.2 in) DU penetrator, which will reach a muzzle velocity of 1,670 metres per second (5,500 ft/s) because of 8.1 kg (18 lb) of JA-2 propellant.[1] Maximum effective range is 3,000 m (3,300 yd).[1] According to Jane's the M829 is capable of penetrating 540 mm (21 in) of RHA steel armor at 2,000 m (2,200 yd) range.[1] It is no longer in production and has been succeeded by the M829A1, M829A2, and M829A3.
M829A1[]
The M829A1 (nicknamed the "Silver Bullet" by Operation Desert Storm tank crews) has proven itself against the Iraqi armor during Operation Desert Storm, however its effectiveness has been reduced by modern reactive armor like the Russian Kontakt-5, which led to the rapid development of the M829A2 and later the M829A3 (this in turn led to the development of the new Russian 'Relikt' ERA). The round weighs 20.9 kg (46 lb) and has an overall length of 984 mm (38.7 in). 7.9 kg (17 lb) of JA 19 propellant create a chamber pressure of 5,600 bar which leads to a muzzle velocity 1,575 m/s (5,170 ft/s). The 684 mm (26.9 in) penetrator weighs together with the sabot 9 kg (20 lb). The weight of the penetrator alone is 4.6 kg (10 lb). The effective target range is 3,000 m (3,300 yd).[2] Point-blank the M829A1 is estimated to penetrate 670 mm (26 in) of steel armour, which decreases to 620 mm (24 in) at 1,000 m (1,100 yd) and 570 mm (22 in) at 2,000 m (2,200 yd).[3] At 4,000 m (4,400 yd) it is still believed to penetrate 460 mm (18 in) of steel armor.[3]
M829A2[]
M829A2 cross-section
The M829A2 APFSDS is a third-generation anti-tank round based on the M829 penetrator and designed for the 120 mm M256 main gun in the M1A1 (or later) Abrams main battle tank. The M829A2 was rapidly developed to have the capability to destroy tanks equipped with Kontakt-5 ERA. The M829A2 has several improvements over the M829A1, including: a longer depleted uranium penetrating rod than previous designs, giving it improved performance over previous types of anti-tank rounds; better manufacturing processes for the penetrator; and a partially cut propelling charge to allow it to be more energetic[Clarification needed] while loading like a stick charge[Clarification needed]. The M829A2 was also the first APFSDS round to use carbon fiber sabot petals, reducing the weight of the overall round and allowing for the larger penetrator. Combined these features boost its muzzle velocity to 1,680 m/s (5,500 ft/s), while operating at slightly lower pressure. The M829A2 entered service in the United States Army in 1993.
M829A3[]
The M829A3 is a 120 mm APFSDS round developed from the M829A2 round. It completed type classification standard in March 2003 and is currently in full rate production for the US Army.
Very little is known about the round. The M829A3 uses a more efficient propellant, RPD-380, giving it a boost in muzzle velocity. The M829A3 round has a total weight of 22.3 kg(49.1 lb) and length of 892 mm (35.1 in). It uses 8.1 kg (18 lb) kg of RPD-380 stick propellant, accelerating a 10 kg (22 lb) kg depleted uranium rod penetrator estimated from cutaway mock-ups to be 800 mm (31 in) long to a muzzle velocity of 1,555 m/s (5,100 ft/s). The sabot is built of composite material.[2]
M829E4[]
The E4 variant was under development by General Dynamics Ordnance and Tactical Systems and Alliant Techsystems, with one contractor to be downselected.[4] On July 11, 2011, Alliant Techsystems was selected to further develop the M829E4 Advanced Kinetic Energy (AKE) tank round.[5]
References[]
- ↑ 1.0 1.1 1.2 "120 mm M829 APFSDS-T cartridge (United States), Tank and anti-tank guns". Jane's Information Group. 02.01.2012. http://articles.janes.com/articles/Janes-Ammunition-Handbook/120-mm-M829-APFSDS-T-cartridge-United-States.html.
- ↑ 2.0 2.1 "120mm Tank Gun KE Ammunition". Defense Update. 2006-11-22. http://www.defense-update.com/products/digits/120ke.htm. Retrieved 2007-09-03.
- ↑ 3.0 3.1 Zaloga., Steven J. (10/08/2009). T-72 Ural vs M1 Abrams. Osprey Publishing. p. 34. ISBN 978-1-84603-407-7.
- ↑ "Future tank round". http://www.fas.org/man/dod-101/sys/land/wsh2011/108.pdf. Retrieved 5 November 2010.
- ↑ ATK To Develop M829E4 120mm Advanced Kinetic Energy Round - Deagel.com, July 11, 2011
External links[]
The original article can be found at M829 and the edit history here.