Quad TiltRotor | |
---|---|
Role | Cargo tiltrotor |
Manufacturer | Bell and Boeing |
Status | Study |
Developed from | Bell Boeing V-22 Osprey |
The Bell Boeing Quad TiltRotor (QTR) is a proposed four-rotor derivative of the V-22 Osprey tiltrotor developed jointly by Bell Helicopter and Boeing. The concept is a contender in the U.S. Army's Joint Heavy Lift program. It would have a cargo capacity roughly equivalent to the C-130 Hercules, cruise at 250 knots, and land at unimproved sites vertically like a helicopter.[1]
Development[]
Background[]
Bell developed its model D-322 as a quad tiltrotor concept in 1979. The Bell Boeing team disclosed in 1999 a Quad TiltRotor design the companies had been investigating for the previous two years. The design was for a C-130-size V/STOL transport for the US Army's Future Transport Rotorcraft program and would have 50% commonality with the V-22. This design was to have a maximum takeoff weight of 100,000 lb (45,000 kg) with a payload of up to 25,000 lb (11,000 kg) in a hover.[2][3] The design was downsized to be more V-22-based and to have a payload of 18,000 to 20,000 lb (8,200 to 9,100 kg). This version was referred to as "V-44".[2][4] Bell received contracts to study related technologies in 2000. Development was not pursued by the US Department of Defense.[2]
During 2000-06, studies of the aerodynamics and performance of a Quad Tilt Rotor were conducted at the University of Maryland, College Park. This effort was initially funded by NASA/AFDD and subsequently by Bell. An experimental investigation in helicopter mode with ground effect found that it was possible to reduce the download on the aircraft from 10% of the total thrust to an upload of 10% of the thrust.[5] A parallel Computational Fluid Dynamics (CFD) study confirmed these findings.[6]
Joint Heavy Lift studies[]
In September 2005 Bell and Boeing received a cost-sharing contract worth US$3.45 million from the U.S. Army's Aviation Applied Technology Directorate for an 18-month conceptual design and analysis study lasting through March 2007, in conjunction with the Joint Heavy Lift program.[7][8] The contract was awarded to Bell Helicopter, which is teaming with Boeing's Phantom Works. The QTR study is one of five designs; another of the five is also a Boeing program, an advanced version of the CH-47 Chinook.[1]
During the initial baseline design study, Bell's engineers are designing the wing, engine and rotor, while the Boeing team is designing the fuselage and internal systems.[9] A similar arrangement is used on the V-22.
A one-fifth-scale wind tunnel model has undergone testing in the Transonic Dynamics Tunnel (a unique transonic wind tunnel) at NASA's Langley Research Center during summer 2006. The "semi-span" model (representing the right half of the aircraft) measured 213 inches in length and had powered 91-inch rotors, operational nacelles, and "dynamically representative" wings.[10]
The primary test objective was to study the aeroelastic effects on the aft wing of the forward wing's rotors and establish a baseline aircraft configuration.[1] Alan Ewing, Bell's QTR program manager, reported that "Testing showed those loads from that vortex on the rear rotor [are the] same as the loads we see on the front [rotors]," and "Aeroelastic stability of the wing looks exactly the same as the conventional tiltrotor". These tests used a model with a three-bladed rotor, future tests will explore the effects of using a four-bladed system.[9]
Besides the research performed jointly under the contract, Bell has funded additional research and wind tunnel testing in cooperation with NASA and the Army.[11] After submission of initial concept study reports, testing of full-scale components and possibly a sub-scale vehicle test program was expected to begin.[1] Pending approval, first flight of a full-scale prototype aircraft was slated for 2012.[9]
The study was completed in May 2007,[12] with the Quad TiltRotor selected for further development. However, additional armor on Future Combat Systems manned ground vehicles caused their weight to increase from 20 tons to 27 tons, requiring a larger aircraft.[13] In mid-2008, the U.S. Army continued the Joint Heavy Lift (JHL) studies with new contracts to the Bell-Boeing and Karem Aircraft/Lockheed Martin teams. The teams were to modify their designs to reach new JHL specifications. JHL became part of the new US Air Force/Army Joint Future Theater Lift (JFTL) program in 2008.[14] In mid-2010, the US DoD was formulating a vertical lift aircraft plan with JFTL as a part.[15] The DoD also requested information from the aerospace industry on technologies for JFTL in October 2010.[16][17]
Design[]
The conceptual design is for a large tandem wing aircraft with V-22 type engines and 50-foot rotors at each of the four wing tips. The C-130-size fuselage would have a 747-inch-long cargo bay with a rear loading ramp that could carry 110 paratroopers or 150 standard-seating passengers. In cargo configuration, it would accommodate eight 463L pallets.[9]
In addition to the baseline configuration, the Bell-Boeing team is including eight possible variants, or "excursion designs", including a sea-based variant. The design team is planning on payloads ranging from 16 to 26 tons and a range of 420 to 1000 nmi. The baseline version includes a fully retractable refueling probe and an interconnecting drive system for power redundancy.[9]
One of the design excursions explored by the team, dubbed the "Big Boy", would have 55-foot rotors and an 815-inch-long cargo bay, making it able to carry one additional 463L pallet and accommodate a Stryker armored combat vehicle.[9]
See also[]
- Powered lift
- Quadcopter
- Bell Boeing V-22 Osprey
- Bell X-22
- Curtiss-Wright X-19
- List of military aircraft of the United States
- List of VTOL aircraft
References[]
- ↑ 1.0 1.1 1.2 1.3 "Diversity in Design: Boeing offers 2 of 5 development options in rotorcraft program". Boeing Frontiers magazine, January 2007.
- ↑ 2.0 2.1 2.2 Norton 2004, p. 86.
- ↑ Hirschberg, Mike. "On the Vertical Horizon: Bell Designs Are Accelerating at Full Tilt". vtol.org.
- ↑ V-44: Pentagon's Next Air Transport. Popular Mechanics, September 2000.
- ↑ Radhakrishnan, Anand and Fredric Schmitz. "An Experimental Investigation of Ground Effect on a Quad Tilt Rotor in Hover and Low Speed Forward Flight". University of Maryland, 2006.
- ↑ Gupta, Vinit. "Quad Tilt Rotor Simulations in Helicopter Mode using Computational Fluid Dynamics". University of Maryland, 2005.
- ↑ "Boeing receives two study contracts from U.S. Army for Joint Heavy Lift". Boeing, 23 September 2005.
- ↑ "Bell-Boeing's QTR selected for Heavy Lift study". Boeing, 22 September 2005.
- ↑ 9.0 9.1 9.2 9.3 9.4 9.5 Fein, Geoff. "Bell-Boeing Quadtiltrotor completes first wind tunnel testing". Defense Daily, 13 October 2006.
- ↑ "Wind Tunnel testing completed on Bell Boeing quad tiltrotor". Helis.com, September 13, 2006.
- ↑ "Wind Tunnel testing completed on Bell Boeing quad tiltrotor". Rotorbreeze, p. 14, October 2006.
- ↑ "Heavy duty: US Army backs tiltrotor as future battlefield airlifter". Flight International, 14 January 2008.
- ↑ Osborn, Kris. "USAF, Army Merge Heavy-Lift Efforts". Defensenews.com, 14 April 2008.
- ↑ Warwick, Graham. "U.S. Army Extends JHL Concept Studies". Aviation Week, 1 July 2008.
- ↑ Brannen, Kate. "Pentagon Sheds Some Light on JFTL Effort". Defense News, 15 July 2010.
- ↑ Joint Future Theatre Lift (JFTL) Technology Study (JTS) Capability Request for Information (CRFI). USAF via fbo.gov, 20 October 2010.
- ↑ "Joint Future Theater Lift (JFTL) Technology Study (JTS)". US Air Force, 20 October 2010.
- Norton, Bill. Bell Boeing V-22 Osprey, Tiltrotor Tactical Transport. Midland Publishing, 2004. ISBN 1-85780-165-2.
External links[]
- Quad Tiltrotor QTR page on GlobalSecurity.org
- "CH-53X HLR & JHL: Future Heli Programs on Collision Course?". Defense Industry Daily, 27 September 2005.
- "Bell and Boeing working on quad tilt-rotor design". Dallas Morning News, 24 August 2006.
- "US Army looking at three configuration concepts for large cargo rotorcraft". Flight International, 9 October 2007.
|
The original article can be found at Bell Boeing Quad TiltRotor and the edit history here.