The B28, originally Mark 28, was a thermonuclear bomb carried by U.S. tactical fighter bombers and bomber aircraft. From 1962 to 1972 under the NATO nuclear weapons sharing program, American B28s also equipped six Europe-based Canadian CF-104 squadrons known as the RCAF Nuclear Strike Force. It was also supplied for delivery by UK-based Royal Air Force Valiant and Canberra aircraft assigned to NATO under the command of SACEUR. Also USN carrier based attack aircraft such as the A3D Skywarrior and the A4D Skyhawk were equipped with the MK 28.
The Mk 28 was produced from 1958 through 1966. It used the W28 lightweight, Class D warhead (also shared with the TM-76 Mace surface-to-surface missile and the GAM-77 Hound Dog air-launched cruise missile). After 1968 it was redesignated B28.
Twenty different versions of the B28 were offered, distinguished by their yield and safety features. The B28 used the "building block" principle, allowing various combinations of components for different aircraft and roles. The B28 had a diameter of about 22 in (58 cm), with a length varying between 96 in (2.44 m) and 170 in (4.32 m) and weight of 1,700 lb (771 kg) to 2,320 lb (1,053 kg), depending on the model type and whether a parachute retard pack was fitted. The principal configurations were as follows:
- B28EX — (EXternal), streamlined external-carriage version for free-fall delivery (no parachute)
- B28RE — (Retarded External) streamlined external-carriage version with a parachute retarder (4 ft. pilot, 28 ft. ribbon chute)
- B28IN — (INternal) unstreamlined internal-carriage version for free-fall delivery, primarily for the Republic F-105 Thunderchief
- B28RI — (Retarded Internal) unstreamlined internal-carriage version with parachute retarder
- B28FI — (full Fusing Internal) unstreamlined internal-carriage version with parachute for laydown delivery; used only by SAC B-47s and B-52s. The FI, for "Full Fuzing Internal" was developed to adapt to new low-level delivery techniques of the Air Force in the 1960s, and is the only model of this bomb equipped for air, ground, and delayed action burst.
The range of explosive yields was as follows:
- Mod 1 — 1.1 megaton TNT equivalent
- Mod 2 — 350 kiloton TNT equivalent
- Mod 3 — 70 kiloton
- Mod 5 — 1.45 megaton
The B28 bomb design has been described as the origin of a series of related nuclear warheads. The nuclear fission first stage or primary, code-named the Python primary, was reused in several subsequent weapons. The B28 was the 'mainstay' of SAC during the 'Cold War' and have yet to be completely dismantled by the Defense Department (as of 2012).
Nuclear researcher Chuck Hansen's research indicates that the Python primary was used in the US B28 nuclear bomb and the W28, W40, and W49 nuclear warheads.
Accidents and incidents
- "B28 Nuclear bomb (United States)". Jane's Information Group. http://www.janes.com/extracts/extract/jsws/jsws0609.html. Retrieved 2008-11-10.
- MARK 28 THERMONUCLEAR BOMB // National Museum of the USAF, 8/16/2012: "The artifacts on exhibit are BDU-16/E training variants of the Mk-28 and are displayed on an MHU-7/M Bomb Lift Trailer... return to the Cold War Gallery."
- Complete List of All U.S. Nuclear Weapons, The Nuclear Weapon Archive
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|