Military Wiki

U.S. Air Force Fire Chief/Marshal Badge

Air Force Fire Protection Badge shields or "scrambles"

The Air Force Fire Protection Badge is a military badge of the United States Air Force that is issued to those service members who have been trained in safety and fire prevention, have qualified as military firefighters, and have been assigned to an Air Force fire department.[1][2]

The Air Force Fire Protection Badge is considered an identification emblem rather than a personal decoration and is only worn when serving in the capacity as an Air Force firefighter; the Air Force Fire Protection Badge must be surrendered upon termination of duty as a firefighter and is not considered a permanent decoration.[1]

The Air Force Fire Protection Badge is worn on the lower left breast pocket of a military uniform. The badge is similar in appearance to the Air Force Security Police Badge. The Fire Protection career field falls under Civil Engineering. All Air Force Fire Protection Specialists are also awarded the Civil Engineer Occupational Badge, which stays with the Airman throughout his or her career. Other branches of the U.S. military have not authorized a specific firefighter badge for wear of military uniforms. Only Air Force personnel are authorized to wear a firefighter badge on Air Force uniforms (highly polished metal for dress uniforms, subdued green for BDU, subdued tan for DCU).[1]

The center shield, or "scramble," of the firefighter's badge is replaced with different bugles to denote different fire officers. One silver bugle with a crossed fire ax and helmet is worn by firefighters, three gold bugles is worn by Assistant Fire Chiefs, four gold bugles for Deputy Fire Chiefs, and five gold bugles for Fire Chiefs and Base Fire Marshals.[2][3]

History of Air Force Fire Protection Badge

Consideration of a distinctive emblem for USAF Fire Protection Personnel began in the fall of 1964. The present device was approved early spring 1965. Military and civilian fire protection personnel were authorized in July 1965 to wear a standard organizational emblem identifying them as being assigned to fire protection activities.[citation needed]

Initial stocks of 43,000 of the blue, red, gold, and white embroidered emblems had been ordered by Headquarters USAF. They were distributed through major air commands on the basis of three per individual connected with fire protection.[citation needed]

The new patch will be worn according to AFM 35-10; this means over the left breast pocket. The emblem can be worn on regular utility and special purpose clothing, but not on military service, dress, and improved fatigue uniforms.[citation needed]

The patch is a circular device topped by a golden eagle against a white cloud. A fireman's helmet, trumpet, and axe are depicted in red on a white circular background in the center. "USAF" In blue on a gold background and "Fire Protection" in white on a blue background are lettered around the white center.[4]

See also


  1. 1.0 1.1 1.2 AFI36-2903, Dress and Personal Appearance of Air Force Personnel, Secretary of the Air Force, dated 18 July 2011, last accessed 15 July 2012
  2. 2.0 2.1 AFI32-2001, Fire Emergency Services Program, Secretary of the Air Force, dated 8 September 2008, certified current on 10 November 2010, last accessed 15 July 2012
  3. MIL-DTL-3628/124 Detail Specification Sheet; Badge, Identification, Fire Protection, Air Force, dated 15 November 1996, last accessed 15 July 2012
  4. Air Force Fire Protection Badge (Cloth Patch) Full Color, last accessed 15 July 2012

This page uses Creative Commons Licensed content from Wikipedia (view authors).