Military Wiki
6mm Lee Navy
6mmleenavy
Type Rifle
Place of origin US flag 44 stars USA
Production history
Designed 1895
Specifications
Case type Semi-rimmed, bottleneck
Bullet diameter 0.236 in (6.0 mm)
Neck diameter .278 in (7.1 mm)
Shoulder diameter .402 in (10.2 mm)
Base diameter .445 in (11.3 mm)
Rim diameter .448 in (11.4 mm)
Case length 2.35 in (60 mm)
Overall length 3.11 in (79 mm)
Rifling twist 1:7½
Primer type Boxer large rifle
Ballistic performance
Bullet weight/type Velocity Energy
75 gr (5 g) 3,300 ft/s (1,000 m/s) 1,809 ft·lbf (2,453 J)
100 gr (6 g) 2,680 ft/s (820 m/s) 1,595 ft·lbf (2,163 J)
112 gr (7 g) 2,650 ft/s (810 m/s) 1,895 ft·lbf (2,569 J)
112gr (7.3g) (military loading) 2,560 ft/s (780 m/s) 1,629 ft·lbf (2,209 J)
Test barrel length: 24 in.; 28 in. (M1895)
Source(s): Barnes & Amber; Sharpe, Philip, The Rifle in America

The 6mm Lee Navy aka 6mm U.S.N.[1] or .236 Navy[2] is an obsolete American rifle cartridge.[3] It was the service cartridge of the United States Navy and Marine Corps from 1895, officially replacing the .45-70 Government round, and was the first small-bore high-velocity smokeless powder cartridge to be adopted by either service.[1] The 6mm Lee Navy was in turn replaced by the .30 Army (.30-40 Krag) cartridge in 1899.

History and development[]

By 1894, the U.S. Navy desired to adopt a modern small-bore, smokeless powder service cartridge and rifle in keeping with other first-line naval powers for both naval and marine forces.[4] Naval authorities decided that the new cartridge should be adaptable to both rifles and machine guns.[5] Noting that the world's military forces were adopting smaller and smaller caliber rifles with higher velocity cartridges, U.S. naval authorities decided to leapfrog the trend to smaller and smaller calibers by adopting a cartridge in 6mm (0.236 inch) caliber, with a semi-rimmed case capable of holding up to 40 gr (0.091 oz; 2.6 g) of 'rifleite' smokeless powder and proof chamber pressures of up to 60,000 psi.[4] While the government cartridge was being developed, the Navy tested rifle barrels in various alloys and rifling twists, eventually settling on a barrel steel made of 4.5 per cent nickel steel, with a rifling twist of one turn in 6.5 inches.[6]

As the Chief of the Bureau of Naval Ordnance stated in his 1897 Small Arms report to the Secretary of the Navy, "In making what may appear a radical departure in its selection of a caliber smaller than as yet adopted elsewhere...the Bureau is convinced it is looking to the future...it is surely wise to attempt to advance with one stride as far as existing conditions allow toward the goal to which the world is moving with slow steps."[4][6] The report went on to list the advantages of the smaller 6mm caliber: greatly increased velocity, flatness of bullet trajectory, reduced recoil, a 100% increase in penetration compared to the former .45-70 Government cartridge, and the ability to carry twice the number of cartridges per individual sailor or marine.[4] However, the report acknowledged the 6mm round had two principal disadvantages: first, that as a small-caliber round, the 6mm bullet would not sufficiently wound an enemy to put him out of action, and second, the "shock" or stopping power of the smaller bullet would not "stop the onset of excited men at short range."[4] In answer to these objections, the report gave three responses: first, "the battle of the future will be fought at long range, and men will not live to come to close quarters with an enemy who stands his ground"; second, 99% of wounded enemy soldiers would not likely investigate the severity of their wound, but simply retire to the rear; third, the explosive effect of a small-caliber, high-velocity bullet against the human body, whereby the bullet tumbled or fragmented to produce devastating wounds against bone or fluid-filled organs, would be more incapacitating at all ranges than wounds made by a slow-moving bullet of large caliber.[4]

On August 1, 1894 a naval test board was convened at the Naval Torpedo Station in Newport, Rhode Island to test submitted magazine rifles in the new 6mm Navy caliber developed by naval ordnance authorities; according to the government notice of bid requirements, no other calibers or cartridges were to be considered.[6] Winchester made the ammunition for the government,[1] which in turn provided each competitor with 6mm U.S.N. cartridges and 0.236-inch caliber rifle barrels, the latter supplied unchambered and with receiver threads uncut.[6] The rifle action was required to withstand the firing of five overpressure (proof) cartridges with a chamber pressure of 60,000 psi.[6] Several inventors and rifle manufacturers submitted models for test, among them James Paris Lee, who offered two designs, a turnbolt and a cam-action or locking bolt type, the Lee straight-pull. The Lee straight-pull was chosen as the winner in repeated trials and adopted by the U.S. Navy in 1895 as the Lee Rifle, Model of 1895, caliber 6-mm.[7][8][9][10]

As adopted by the Navy after tests at the Naval Torpedo Station,[8] the "Ball Cartridge, 6mm" or 6mm U.S.N. cartridge featured a long bottlenecked semi-rimmed brass case and a 135-grain (0.31 oz; 8.7 g) round-nosed, cupro-nickel coated, steel-jacketed lead-core bullet.[9][11][12] The rifle powder for the new cartridge was Rifleite, a flake nitrocellulose smokeless powder originally developed for use in the British .303 cartridge.[13][14]

The new 6mm cartridge achieved a muzzle velocity of 2,550 fps (777 m/s)[4] and was initially manufactured by Winchester (WRA) for the Navy. Because of production delays and the desire to have a secondary ammunition source in the event of war or other emergency, the Union Metallic Cartridge (UMC) Company was also awarded a contract to produce 6mm ammunition.[1] After the adoption of the M1895 Lee, the case rim of the government cartridge was redesigned with a slight bevel (rebated rim) for optimum performance in the en bloc charger-loaded magazine of the M1895 rifle; the revised cartridge was designated the 6mm U.S.N., but continued to be referred to in naval stores reports as the Ball Cartridge, 6mm. Owing to difficulties in obtaining acceptable lots of Rifleite smokeless powder for the cartridge, as well as cartridge clips, the initial April 1896 Navy order of 1,000,000 cartridges was not filled by Winchester and UMC for over a year.[9]

In March 1897, after reports of excessive chamber pressures and short barrel life (3,000 rounds) despite the use of 4.5 per cent nickel-steel barrels,[6] the specifications for the 6mm round were changed to incorporate a 112-grain (0.26 oz; 7.3 g) round-nosed lead-core bullet with a copper jacket, which was then tin-plated to prevent corrosion from salt air.[9][11][12][15] Winchester and UMC had difficulty in achieving the pressure limit specification (43,000 psi) for the new loading with Rifleite, and chamber pressures varied widely from lot to lot of powder, ranging up to 60,000 psi.[9][15] The new M1895 Colt-Browning machine gun was also modified to accept the new 112-grain (0.26 oz; 7.3 g) loading the same year, and a further 500,000 cartridges were ordered to accommodate machine-gun usage.[9]

Firing a 112-grain (0.26 oz; 7.3 g) bullet at 2,560 ft/s (780 m/s) from a 28 in (710 mm) barrel,[9][16] the 6mm U.S.N. was the highest-velocity cartridge used by any military force at the time of its adoption. Designed to achieve better penetration than the Army's .30 Army cartridge used in the Model 1892/98 (Krag) rifle, the round was intended to perforate the hulls of small enemy craft such as patrol and torpedo boats, and could penetrate 13 in (330 mm) of soft wood at 700 yd (640 m),[16] 0.5 in (13 mm) of low-carbon steel at 10 feet (3 m); 0.375-inch (9.5 mm) of ordinary boiler plate at 100 ft (30 m), or a .276 in (7.0 mm)-thick suspended chrome steel alloy boiler plate at 150 ft (46 m).[9][12] The 112-grain (0.26 oz; 7.3 g) roundnosed bullet had a flatter trajectory than its 135-grain (0.31 oz; 8.7 g) predecessor at all ranges up to 500 yards; above this distance, the heavier bullet began to show an advantage.[9] The new loading had an effective range (individual rifle fire) of around 600-700 yards, at which point the blunt-tip bullet rapidly lost velocity and energy.[11] The 112-grain (0.26 oz; 7.3 g) bullet, like its predecessor, demonstrated an inclination to instability unless rapidly rotated; the M1895 Lee rifle was therefore given a rapid barrel rifling twist of one turn in 7.5 inches (19 cm) (with right-hand twist) to keep the bullet from wobbling or tumbling at extended ranges.[16] At some point, this rifling was changed in later production rifles to one turn in 10 inches RH (25 cm).[17] Contemporary medical reports of the day noted the 112-grain (0.26 oz; 7.3 g) bullet produced noticeably greater damage to tissue and bone than other military cartridges of the day when fired at full velocity (2,560 fps), and the bullet's copper jacket frequently fragmented or detached entirely from its lead core after penetrating a hard substance such as bone or metal.[12] On the other hand, when the 6mm bullet struck muscle or air-filled cavities such as the lungs, the bullet tended to make a perforating wound of small diameter that caused little damage.[18]

The 6mm Lee Navy cartridge proved expensive to produce, with per-round cost approximately double that of the previous .45-70 service cartridge.[4] Delays caused by difficulties in getting smokeless powder of the proper specification delayed shipments of ammunition under the Navy's contract with Winchester (WRA) and UMC, and shipments of the 6mm Lee rifle were also delayed due to manufacturing issues and contract changes. As a result, the .45-70 government cartridge and small arms chambered for it continued in front-line service with the Navy until 1897, when the latter cartridge was made substitute standard for second-line vessels. Because of arguments over inadequate congressional appropriations, Marine battalions scheduled to be equipped with the Lee had not received either rifles or ammunition until 1897, two years after adoption of the cartridge and rifle.[19] Colonel-Commandant Charles Heywood of the Marine Corps reportedly refused initial deliveries of small numbers of Lee rifles to Marine battalions until he received assurances that an appropriation would be made to the Corps for at least 3,000 Lee rifles, improved target ranges, and enough ammunition to continue existing marksmanship training programs.[20] Despite this threat, the report of the Marine Corps Quartermaster as of September 1897 begged the Secretary for an additional $10,000 appropriation for 6mm ammunition to allow Marines to conduct live fire and target practice with the Lee rifle.[21] The report went on to warn that, except for drill practice, enlisted Marines were "entirely unfamiliar with the use of this arm", since all target practice had to be conducted using the old single-shot Springfield and .45-70 ammunition.[21]

Issued to both naval armed guards (bluejackets) and Marine battalions, the 6mm Lee Navy cartridge saw combat service with U.S. forces (primarily Marine riflemen and machine-gun teams) in both Cuba and the Philippines during the Spanish–American War, and was also issued to small formations of attached Cuban rebels participating in the Guantánamo Bay campaign. The lighter weight of the 6mm Lee cartridge meant individual riflemen could carry more cartridges, since 160 .30 Army cartridges weighed as much as 220 rounds of 6mm.[22]

During the fighting to secure Guantánamo Bay harbor in Cuba, the light weight of the 6mm Lee Navy cartridge enabled individual Marines to carry extra ammunition without an undue weight penalty, an advantage when pursuing an enemy over mountainous and difficult ground. The extra cartridges proved useful when early ammunition resupply from Navy ships was disrupted at the outset of the Guantanamo operation, allowing Marines to continue their assault even while individually resupplying Cuban rebels who had run short of ammunition.[23]

Later, during the early stages of the Moro Rebellion in the Philippines, the 6mm round was criticized by some Marines for failing to stop the frenzied charges of bolo-wielding Moro juramentados at very close ranges.[24] The possibility a 6mm bullet might lack shocking power (stopping power) had been raised as far back as 1895 when the cartridge was in the process of being developed for adoption.[4][10] On the other hand, the Marine Legation Guard, which used the 6mm Lee in the defense of the foreign legations in Peking during the Boxer Rebellion of 1900, together with marines and navy bluejackets serving in the expedition relieving the besieged legations, apparently had no such criticisms.[25]

However, the high velocity 6mm round was ahead of its time in terms of powder technology and barrel steel metallurgy.[26] In addition to complaints of bore fouling with corrosive nitro-compounds[27][28] M1895 rifles in service began to display signs of early barrel wear and throat erosion caused by inconsistent chamber pressures and powder burn rates, despite the Navy's requirement of nickel-steel barrels.[15][29]

Several factors led to the discontinuance of the 6mm Lee as an official U.S. military cartridge. The most important was the decision of the War Department, based upon a recommendation by a board composed of Army, Navy, and Marine Corps officers, to standardize on the .30 Army cartridge for all services.[15][30][31] Additionally, the 6mm's special - and expensive - semi-rimless beveled-rim case was designed to work optimally in the charger clips of the M1895 rifle; this proved an unnecessary complication when adapting the cartridge to other, more modern machine guns and small arms.[9] Aside from the benefits of interchangeability between the services, the board noted the government had its greatest investment in the .30 Army cartridge and rifles chambered for it.[31] Nevertheless, the board acknowledged the rimmed .30 Army round was less than ideal when used in modern machine guns, and the decision to adopt the it for the Navy and Marine Corps might be postponed until a rimless version was developed (which would eventually take place in 1903 in the form of the .30-03).[31]

Another factor in the demise of the 6mm Lee was its bullet; the 6mm Lee was adopted prior to the invention of the spitzer-shape bullet.[11][15] As a result, the light, roundnosed 6mm bullet lost much of its effectiveness at 600-700 yards, while the 220-grain (0.50 oz; 14 g) roundnosed bullet of the .30 Army service cartridge was still considered effective at ranges of 1,000 yards or more, an important consideration in the days when rifle and indirect machine gun fire at distant targets such as massed enemy infantry was considered necessary.[11][15] While by no means a universal opinion, the lack of shocking power of the 6mm Lee reported by some Marine units in combat may also have weighed against the idea of delaying a change to the .30 Army for all services.[24] A further complication was that issues of barrel wear from the Rifleite smokeless powder and corrosive primer used in the 6mm cartridge continued to plague Navy ordnance authorities. Finally, due in part to its long, thick-gauged semi-rimless rim case and beveled rim, the 6mm Lee was one of the most expensive service cartridges to produce in terms of cost per round, yet it was already becoming obsolescent in comparison to ammunition utilizing more efficient powders and true rimless cases.[9] Rapid developments in military small arms ammunition would soon demonstrate the advantages of a magazine-fed rifle and machine gun cartridge with a rimless case and spitzer bullet, features not found in either the .30 Army or the 6mm Lee.[26]

In 1899, the Navy officially adopted the .30 Army cartridge for all small arms, though it continued to use the 6mm for existing stocks of Lee rifles and Colt machine guns.[32] In 1907, the Navy adopted the .30-'06 Springfield cartridge for both rifles and machine guns. 6mm Lee ammunition still in military stores in 1917 was sold at auction by the government to a private military surplus dealer, F.W. Bannerman & Co. Unfortunately for Bannerman, the powder used in the 6mm government cartridges had deteriorated to such a degree they were determined to be unfit for sale, and the company destroyed the entire lot rather than resell them to the public.[15]

Commercial and hunting use[]

A commercial sporting version of the M1895 Lee Straight Pull was sold by Winchester, which did not sell well in U.S. markets due to a heavy preference by American consumers for lever action rifle designs. The cartridge was chambered for a time in the Remington-Lee and Blake magazine rifles. With a reputation for penetration and explosive effect, the 6mm Lee was reportedly quite popular as a hunting cartridge in Alaska and Northwest Canada.[33] It was discontinued from commercial production in 1935.[26] The 6mm Lee cartridge case later served as the basis for the .220 Swift, which used a necked-down 6mm Lee case with a .22-caliber bullet.[26]

See also[]

References[]

  1. 1.0 1.1 1.2 1.3 Hanson, Jim, The 6mm U.S.N. - Ahead Of Its Time, Rifle Magazine, Vol. 9, No. 1 (January–February 1977), pp. 38-41
  2. http://www.ammo-one.com/6mmLEE.html
  3. Barnes, Frank C., ed. by John T. Amber, "6mm Lee Navy" in Cartridges of the World (Northfield, IL: DBI Books Inc., 6th ed., 1984), p. 102
  4. 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 Sampson, W.T., Annual Reports of the Navy Department: Report of Chief of Bureau of Ordnance, Washington, D.C.: U.S. Government Printing Office (1895), pp. 215-218
  5. The New York World, The World Almanac and Encyclopedia: Rifles Used by the Principal Powers of the World, Vol. 1 No. 4, New York: Press Publishing Co. (January 1894), p. 309: The Naval Small Arms Board reported that in adopting the 6mm government cartridge specification, "due consideration has been given to the desirability of using the same cartridge for machine guns as for the small arm, and the Board deems that no difficulty in the manufacture or manipulation of machine guns will be caused by their use of 6mm ammunition."
  6. 6.0 6.1 6.2 6.3 6.4 6.5 Sampson, W.T.,Annual Reports of the Navy Department: Report of Chief of Bureau of Ordnance, Notice to Inventors and Others, Washington, D.C.: U.S. Government Printing Office (1894), pp. 385-387
  7. Twining, N.C. (Ens.), Dept. of the Navy, The Annual Reports of the Navy Department: Report of the Secretary of the Navy - Annual Report of the Inspector of Ordnance, pp. 319-323
  8. 8.0 8.1 The Annual Reports of the Navy Department: Report of the Secretary of the Navy - Report of Naval Small Arms Board, November 22, 1894, Washington, D.C.: United States Navy Dept. (1894), pp. 306-310
  9. 9.00 9.01 9.02 9.03 9.04 9.05 9.06 9.07 9.08 9.09 9.10 The Annual Reports of the Navy Department: Report of the Secretary of the Navy, Washington, D.C.: United States Navy Dept. (1895), p. 308
  10. 10.0 10.1 Dieffenbach, A.C., (Lt.) Dept. of the Navy, The Annual Reports of the Navy Department: Report of the Secretary of the Navy - Report on the Manufacture and Inspection of Ordnance Material, Washington, D.C.: United States Navy Dept. (1897), pp. 321-323
  11. 11.0 11.1 11.2 11.3 11.4 Ouston, Alex, The United States Navy Rifle and the Injuries It Produces, British Medical Association: British Medical Journal, Vol. 1, (1899), p. 756
  12. 12.0 12.1 12.2 12.3 Beyer, Henry G., Observations On The Effects Produced By The 6-mm Rifle and Projectile, Vol. 3, Boston Medical Journal, Boston Society of Medical Sciences (1899), pp. 117-136
  13. Reports of Companies, The Chemical Trade Journal and Oil, Paint, and Colour Review, Vol. 18, June 20, 1896, p. 401: The Smokeless Powder Co., Ltd. originally developed Rifleite for the British .303 cartridge.
  14. Walke, Willoughby (Lt.), Lectures on Explosives: A Course of Lectures Prepared Especially as a Manual and Guide in the Laboratory of the U.S. Artillery School, J. Wiley & Sons (1897) p. 343: Rifleite was a flake smokeless powder composed of soluble and insoluble nitrocellulose, phenyl amidazobense, and volatiles similar to French smokeless powders; unlike cordite, Riflelite contained no nitroglycerine.
  15. 15.0 15.1 15.2 15.3 15.4 15.5 15.6 Newton, Charles, Outing, Ballistics of Cartridges: Military Rifles III, Outing Publishing Co. Vol. 62 (1913), pp. 370-372
  16. 16.0 16.1 16.2 Sharpe, Philip B., The Rifle In America (2nd ed.), New York: Funk & Wagnalls Co. (1947), pp. 235-236
  17. Mann, Franklin W. (Dr.), The Bullet's Flight From Powder to Target: The Internal and External ballistics of Small Arms, New York:Munn & Co. Publishers (1909), p. 303
  18. Plummer, Ralph W., Annual Report of the Surgeon General, U.S. Navy, to the Secretary of the Navy: Report of Ralph W. Plummer, Assistant Surgeon, U.S.N., U.S.S. Princeton, U.S. Navy Dept., Bureau of Medicine and Surgery, Washington, D.C.: U.S. Government Printing Office (1900), pp. 322-323
  19. Heywood, Charles (Col. Commandant), Annual Reports of the Navy, Report of the Commandant of the Marine Corps, Washington, D.C.: U.S. Government Printing Office (1897) p. 558
  20. Hearn, Chester, Illustrated Directory of the United States Marine Corps, Zenith Imprint Press, ISBN 0-7603-1556-6, ISBN 978-0-7603-1556-9 (2003), p. 74
  21. 21.0 21.1 Denny, F.L., Annual Reports of the Navy, Report of the Secretary of the Navy, U.S. Marine Corps Quartermaster Estimates, Washington, D.C.: U.S. Government Printing Office (1897), pp. 572-573
  22. Sage, William H. (Maj.), and Clark, H.C. (Capt.) (ed.), Journal of the United States Infantry Association, Washington, D.C.: United States Infantry Association, Vol. IV, No. 4 (January 1908), p. 520
  23. Keeler, Frank and Tyson, Carolyn A. (ed.), The Journal of Frank Keeler, 1898, Washington, D.C.: Marine Corps Letters Series, No. 1, Training and Education Command, (1967), p. 46
  24. 24.0 24.1 Heinl, Robert D., Soldiers of the Sea: the United States Marine Corps, 1775-1962, Nautical & Aviation Pub Co of America, ISBN 1-877853-01-1, ISBN 978-1-877853-01-2 (1991), p. 189
  25. Simmons, Edward H. and Moskin, J. Robert,The Marine, Hong Kong: Marine Corps Heritage Foundation, Hugh Lauter Levin Associates Inc., ISBN 0-88363-198-9 (1998), p. 158
  26. 26.0 26.1 26.2 26.3 Barnes, Frank C., and Amber, John T. (ed.), Cartridges of the World, Northfield, IL: DBI Books (1972), pp. 73 and 123
  27. Metcalf, V.H., Report of Small Arms Target Practice: Report of the Captain of the Navy Rifle Team, Leavenworth, Kansas, September 6, 1908, Navy Dept., Washington D.C.: U.S. Government Printing Office (1908), p. 38
  28. Suffolk, Henry C. and Berkshire, (Earl of), The Encyclopaedia of Sport, Vol. 4, Lawrence & Bullen (1900), p. 352: Rifleite, like other early smokeless powders, tended to leave considerable amounts of fouling in the barrel, which was difficult to remove unless cleaned out before the barrel cooled.
  29. Johnson, Alfred S. (ed.), The Cyclopedic Review of Current History: New Navy Rifle (Vol. 5), Buffalo, N.Y.: The Evening News Association, Garretson, Cox, & co. (1896), p. 626
  30. Annual Reports of the Secretary of the Navy: Report of the Chief of Ordnance, Washington, D.C.: U.S. Government Printing Office, p. 26
  31. 31.0 31.1 31.2 Mordecai, A. (Col.), "U.S. House of Representatives, Annual Reports of the War Department For the Fiscal Year Ending June 30, 1899: Proceedings of a Board of Officers of the Army, Navy, and Marine Corps, December 8, 1898, Appendix 49, Washington, D.C.: U.S. Government Printing Office, (1899), pp. 531-532
  32. United States Congress, The Story of Panama: Excerpts From the Log Book of the USS Dixie, Rep. Henry D. Flood, Chairman, Committee on Foreign Affairs, House of Representatives, Washington, D.C.: U.S. Government Printing Office, p. 434: As late as October 1903, ships at the New York Navy Yard were still receiving ordnance stores of "Ball Cartridge, 6mm" in amounts outnumbering that of .30 caliber ammunition.
  33. Newton, Charles, Outing, Ballistics of Cartridges: Military Rifles IV, Outing Publishing Co. Vol. 62 (1913), p. 601

Sources[]

  • Barnes, Frank C., ed. by John T. Amber. "6mm Lee Navy", in Cartridges of the World, pp. 73 & 123. Northfield, IL: DBI Books, 1972. ISBN 0-695-80326-3.
All or a portion of this article consists of text from Wikipedia, and is therefore Creative Commons Licensed under GFDL.
The original article can be found at 6mm Lee Navy and the edit history here.