Military Wiki
Advertisement
Ordnance QF 3.7 inch mountain howitzer
3-7 inch mountain gun
A 3.7-inch QF mountain gun. Dated from 1939
Type Mountain gun
Place of origin United Kingdom United Kingdom
Service history
In service 1917–1960
Wars World War I, World War II
Production history
Produced 1915–?
Specifications
Mass 1,610 lb (730 kg)[1]
Barrel length 3 ft 7.5 in (1.10 m)[1]

Shell 20 lb HE, Shrapnel, Smoke, Starshell, HEAT
Calibre 3.7 inches (94 mm)
Recoil Hydro-pneumatic, variable, 17.5–35 inch[1]
Carriage Wheeled, split trail
Elevation −5° to +40°[1]
Traverse 20° L & R[1]
Muzzle velocity 973 ft/s (297 m/s)[1]
Maximum firing range 5,899 yd (5,394 m)[1]

Ordnance, QF 3.7-inch Howitzer was a mountain gun, used by British and Commonwealth armies in World War I and World War II, and between the wars.

History[]

The British Indian Army first requested a modern mountain gun in 1906 to replace the BL 10 pounder Mountain Gun, which had been hastily developed after Second Boer War, but itself had several shortcomings. In particular, the shell weight was seen as too light and the gun lacked any recoil absorber or recuperator, meaning the gun had to be relaid after every shell was fired. However, financial constraints delayed production of the 3.7-inch weapon until 1915. (As a stop-gap, the barrel of the 10 pounder gun was mounted on an updated carriage to produce the 2.75 inch Mountain Gun.

World War I[]

Indian Army QF 3

Indian Army battery, probably 39th, at Jerusalem, December 1917

The 3.7-inch howitzer was first introduced in 1917, and was used in action in that year in Mesopotamia.

The 22nd (Derajat) Indian Frontier Force mountain battery arrived in the East Africa campaign on 18 December 1916, when they relieved the 28th Battery which returned to India.[2] They appear to have re-equipped from the 10 pounder mountain gun to the 3.7-inch howitzer while in East Africa, and first used the new weapon in action in an attack on German positions at Medo, 11 April 1918.[3]

Interwar years[]

3

Indian gun crew firing, India, circa. 1930

The 3.7-inch howitzer superseded the 2.75-inch mountain gun following World War I. It was used by mountain artillery regiments of the Royal Artillery and the Indian Artillery, and saw much service on the North West Frontier of India between the wars.

World War II[]

3

In action in Burma, 3 November 1944

During World War II, the weapon equipped artillery units engaged in the North African Campaign (Tunisia), the Italian Campaign and Burma Campaign, and it was also used in the Netherlands and Ruhr fighting in 1944-45 by units originally destined for mountain warfare in Greece. In the latter theatre, on occasion the gun was dismantled and man-hauled up to the upper floors of buildings to provide close support in urban fighting. A lightened version was used briefly by Airborne formations. At least one example was supplied to the French Army after 1945; it was captured by the Viet Minh and is on display at the Vietnam Army Museum in Hanoi.

During the war the gun, and its ammunition, were also manufactured in other Commonwealth Countries, including South Africa, by the ISCOR (The Iron and Steel Corporation of South Africa), and India. South Africa also produced modified versions of the gun.[4]

The gun was finally declared obsolete by the British Army in 1960, although it had not seen service since 1945.

Details[]

The weapon was designed to be broken into eight mule loads, for transport over difficult terrain. The heaviest single section was the interrupted screw breech, which weighed 247 pounds (112 kg). Given an open gun position, a practiced crew could have the guns unloaded from the mules, reassembled and deployed ready for action in barely two minutes. However, the 3.7-inch howitzer's adjustable suspension system allowed it to be deployed on almost any position, even those too uneven or with too steep a gradient to allow field artillery to be sited. The process of removing the howitzer from a position and reloading it onto the gun mules involved much more lifting and securing loads than deploying it, but could be accomplished in three minutes in favourable conditions.

The howitzer had a split trail, the first British weapon to do so, which allowed firing at very high angles (a useful feature in mountainous terrain). It also had a large rectangular shield to protect the crew from small-arms fire, but this was often omitted to save weight. When it was first introduced, the howitzer had two wooden wheels and was light enough be towed by two horses. Later marks had pneumatic tyres and could be towed by any light vehicle, such as the Bren Carrier or jeep.

The propellant casing had five "charge zones", but HE was restricted to no more than Charge 4, to prevent premature detonation of the shell.

See also[]

Surviving examples[]

Notes and references[]

  1. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Hogg & Thurston 1972, p. 91
  2. Farndale 1988, p. 338
  3. Farndale 1988, p. 351
  4. British Artillery in World War II: The 3.7-inch howitzer
  5. Imperial War Museum (2013). "QF 3.7in Mountain Howitzer Mk I (ORD 137)". IWM Collections Search. http://www.iwm.org.uk/collections/item/object/30025247. Retrieved 10 March 2013. 

Bibliography[]

External links[]



All or a portion of this article consists of text from Wikipedia, and is therefore Creative Commons Licensed under GFDL.
The original article can be found at QF 3.7-inch mountain howitzer and the edit history here.
Advertisement