Military Wiki
Military Wiki
.38-40 Winchester
40sw 38-40 44spl 45acp
.40 S&W, .38-40 Winchester .44 Special, and .45 ACP cartridges.
Type Pistol
Place of origin United States
Production history
Designer Winchester Repeating Arms Company
Produced 1874 to 1937, now in production again.
Specifications
Parent cartridge .44-40 Winchester
Case type rimmed, bottlenecked
Bullet diameter .401 in (10.2 mm)
Neck diameter .416 in (10.6 mm)
Shoulder diameter .4543 in (11.54 mm)
Base diameter .465 in (11.8 mm)
Rim diameter .520 in (13.2 mm)
Rim thickness .058 in (1.5 mm)
Case length 1.30 in (33 mm)
Overall length 1.59 in (40 mm)
Ballistic performance
Bullet weight/type Velocity Energy
180 gr (12 g) SP 1,160 ft/s (350 m/s) 538 ft·lbf (729 J)

Source(s): Cartridges of the World, 11th ed

[1]

The .38-40 Winchester is actually a .40 caliber cartridge shooting .401 caliber bullets. The cartridge was introduced by Winchester in 1874 and is derived from their .44-40 Winchester. This cartridge was introduced for rifles, but in its reintroduction for Cowboy Action Shooting it has seen some popularity as a pistol cartridge. It is not particularly well suited to hunting larger game, but it was popular when it was introduced, along with the previous .44-40 Winchester, for deer hunting. It can be used successfully on smaller game animals, and for self-defense. Current loadings are intended for revolvers.[1]

Design and history[]

It is unclear why this cartridge was introduced as it is very similar to the .44-40 from which it was derived. It has approximately 110 ft·lbf (150 J) less muzzle energy, and has a muzzle velocity about 110 ft/s (34 m/s) less than the .44-40. The bullet differs by only .026 inches in bullet diameter and 20 grains (1.3 g) in standard bullet weight from the original .44-40. The goal may have been to reduce recoil while maintaining a similar bullet sectional density.[2] One unusual design element of this cartridge is that factory ammunition was loaded with a different case profile than the standard chamber for this cartridge, factory ammunition having a much longer neck than the standard chamber. Most reloading dies are designed to size fired brass to the chamber specification rather than that of the original factory ammunition case profile.[3]

The renewed interest in this caliber can be explained by the increasing popularity of Cowboy Action Shooting.[3] Several single-action revolvers have recently been chambered for this cartridge, including the Ruger Vaquero. Most modern reloading data for this cartridge is found in the handgun section of reloading manuals.

Performance[]

Though introduced as an "all-around" cartridge, traditional sources suggest the .38-40 performs inadequately on deer.[3] Ballistically, commercial 'cowboy' loads are similar to the much newer .40 S&W, sharing the same bullet diameter, bullet weight, and similar velocity.[4] A limited number of 'hunting' loads are available commercially, which produce about 25% more muzzle energy than the more common target ammunition.[5]

Synonyms[]

  • .38-40
  • .38-40 WCF
  • .38 CFW
  • .38 WCF

References[]

  1. 1.0 1.1 Barnes, Frank C. (2006) [1965]. Skinner, Stan. ed. Cartridges of the World (11th Edition ed.). Iola, WI, USA: Gun Digest Books. p. 92. ISBN 0-89689-297-2. 
  2. Waters, Ken (1990) [1980]. Pet Loads, volume 2 (5th Edition ed.). Prescott, AZ, USA: Wolfe Publishing. pp. 443–447. ISBN 0-935632-33-6. 
  3. 3.0 3.1 3.2 Jones, Allan, ed (1998). Speer Reloading Manual (13th Edition ed.). Lewiston, ID, USA: Blount, Inc.. pp. 394–400, 542–542. 
  4. [1], Midway 38-40 Ten-X.
  5. [2], Midway 38-40 Winchester Super-X.
All or a portion of this article consists of text from Wikipedia, and is therefore Creative Commons Licensed under GFDL.
The original article can be found at .38-40 Winchester and the edit history here.