Military Wiki
Advertisement
.303/.25
Type Rifle
Place of origin Australia
Production history
Designed 1940s
Specifications
Parent cartridge .303 British
Case type Rimmed, bottleneck
Bullet diameter 0.257 in (6.5 mm)
Neck diameter 0.290 in (7.4 mm)
Shoulder diameter 0.412 in (10.5 mm)
Base diameter 0.460 in (11.7 mm)
Rim diameter 0.540 in (13.7 mm)
Rim thickness .064 in (1.6 mm)
Case length 2.185 in (55.5 mm)
Overall length 2.85 in (72 mm)
Case capacity 50.86 gr H2O (3.296 cm3)
Rifling twist 1-12 inches
Primer type

Large rifle

[1]
Ballistic performance
Bullet weight/type Velocity Energy
87 gr (6 g) SP 3,010 ft/s (920 m/s) 1,750 ft·lbf (2,370 J)
100 gr (6 g) HPBT 2,800 ft/s (850 m/s) 1,740 ft·lbf (2,360 J)
117 gr (8 g) SP 2,800 ft/s (850 m/s) 1,740 ft·lbf (2,360 J)
Test barrel length: 24
Source(s): Reload Bench [2]

The .303/25, sometimes known as the .25/303 is a wildcat centrefire rifle cartridge, based on the .303 British, necked down to fire a .257 projectile, originating in Australia in the 1940s as a cartridge for sporterised rifles, particularly on the Lee Enfield action, similar versions also appeared in Canada around the same time.[3]

Overview[]

The .303/25 was very popular for a number of reasons, one being that the .25 caliber was better suited to small game than the .303, the rifles were cheap and plentiful and in New South Wales ownership of military cartridges was severely restricted. Several versions existed but most were simply necked down and remained full length. Although Lee Enfields were the most common, conversion of other rifles mostly suited to rimmed cartridges such as P14 Enfield, Martini Enfield, 1885 and 1895 Winchesters were often seen, as well as 98 and 96 Mausers.[4]

Loaded ammunition and brass was produced by the Super Cartridge Company, Riverbrand, ICI and Sportco, some using new Boxer primed cases, others using military Berdan primed cases. Cases can be formed simply by necking down .303 British brass available from Remington, Federal, Winchester, Sellier & Bellot and others. Reloading dies are made by most larger manufacturers, like RCBS, Lyman, CH[5] and Simplex.[6]

See also[]

References[]

  1. Donnelly, John J., Handloaders Manual of Cartridge Conversions, p223
  2. "Reload Bench". http://www.reloadbench.com/cartridges/w25303.html. 
  3. Barnes, Frank C., Cartridges of the World, 7th Edition, p173
  4. Barnes, Frank C., Cartridges of the World, 10th Edition, p473
  5. "CH Tool & Die". http://www.ch4d.com. 
  6. Jansa Arms Co - Australia
All or a portion of this article consists of text from Wikipedia, and is therefore Creative Commons Licensed under GFDL.
The original article can be found at .303/25 and the edit history here.
Advertisement